Lowered 4x4

[hummin cummins]

How low can a 4x4 be lowered and how low are some of the ones out there. Pics would be nice.

[torqueslut]

mines prolly 3.5''-4" in front 5" in back

[SCHOOL BUS]

I guess as low as you can go without rubbing. Does weight transfer ever become an issue due to ride height?







Ps I got some brand new two inch drop coils for a 2wd for sale

[torqueslut]

http://i722.photobucket.com/albums/ww225/buntondiesel/truckpic006-1.jpg
i thinks its been lowered a little more since then

[SuperDave4x4]

Looks to have a nice stance in that picture. What size tire and wheel?

[torqueslut]

305/45 18 about 28x12.5

[SCHOOL BUS]

Got any more pics torqueslut? Truck looks sweet

[torqueslut]

Pictures by buntondiesel - Photobucket (http://s722.photobucket.com/albums/ww225/buntondiesel/)

theres a few in there.

[Oscar1017]

i heard the clearance issue is the front diff with the trucks oil pan.. Correct?

whats the lowest you may go still being able to daily the truck? and what components are being used?

[fordcummins]

I heard the same thing

[torqueslut]

i heard the clearance issue is the front diff with the trucks oil pan.. Correct?

whats the lowest you may go still being able to daily the truck? and what components are being used?

the track bar will hit the diff before the oil pan, theres a few inches between the oil pan and axle, u just have to modify the bump stops.

[willtravel2]

Lowered mine 4". Took off leveling kit, one coil off the front and removed the lift blocks on the rear. Took off long homemade pulling bars and added caltracks. Rides like its on rails. I want to go lower just have'nt figured out how yet.

[SKYNYRD]

I might be doing this once my truck is in need of some new rubber.

[Oscar1017]

Lowered mine 4". Took off leveling kit, one coil off the front and removed the lift blocks on the rear. Took off long homemade pulling bars and added caltracks. Rides like its on rails. I want to go lower just have'nt figured out how yet.

Cool do you have any pics by chance??

[02HO4X4]

Does the driveshaft bottom out into the transfer case?

[willtravel2]

I had to shorten the driveshaft. I don't remember offhand, 2 or 3 inches.

[97crewcab]

I took a coil out of the front and cut 1" off the rear blocks. Looks stock but just a little lower at this point.

[Signature600]

the track bar will hit the diff before the oil pan, theres a few inches between the oil pan and axle, u just have to modify the bump stops.

Correct...also, for anyone with a Thuren trackbar, don't lower it...at least not for a DD. Tried going 1.5" lower and the big joint on the trackbar would hit the diff on any bump.

Chris