PDA

View Full Version : isuzu pup power


jeff115
03-03-2011, 08:08 PM
does any body know how to turn up the pump on an isuzu pup?

12vriviera
03-03-2011, 08:16 PM
Get with carcrafter22 he has an isuzu that made a good bit of power

heybob
03-03-2011, 10:46 PM
On the pump there will be a screw with a wire (or just a hole drilled through it if the wire was already removed). Loosen the nut and turn it til when you blip the throttle it doesn't idle back down as fast as you want. I believe it's clockwise for more fuel but it's been awhile since I've messed with mine. Have a hand on the kill switch in case it runs away.

You can adjust the throttle stops also...take it a couple turns out so the arm travels farther, we only got mine up to 3900 on the dyno without adjusting that but it can turn to 5k safely (apparently).

jeff115
03-04-2011, 12:15 AM
ok I believe carcrafter22 has a 4bd1t which is 3.9l and has an in line pump. the pups have a 2.2l with a rotary pump.

Ill try the screw with the wire.

BigPapa
03-04-2011, 01:11 PM
Extra PUPpy chow?:poke:

jeff115
03-04-2011, 09:46 PM
AHAHA!

thirdstreettito
03-11-2011, 07:26 AM
Try the VW Vortex, the early VW 1.6 diesels used rotary pumps, it may be the same pump.