024 vs 035 DV

dbshelton

New member
Joined
Nov 3, 2008
Messages
134
Is there any difference in 024 and 035 Delivery Valves? I ordered a set of 024 valves, 035 valves were sent and the vendor says they are the same. Did I get screwed?
 
If anyone is interested, I have since found out that I do have 035 x 7mm delivery valves. They look very similar to the 024 and 042 valves, but are not the same (all 024 and 042 are supposed to be 8mm). Should fuel a little less, so I'm told they will work very well in my truck. I'm gonna install them and see what happens.
 
If anyone is interested, I have since found out that I do have 035 x 7mm delivery valves. They look very similar to the 024 and 042 valves, but are not the same (all 024 and 042 are supposed to be 8mm). Should fuel a little less, so I'm told they will work very well in my truck. I'm gonna install them and see what happens.

Yep, i had some at one time as well. They are very clean running dvs, that still fuel decent. If you ever want to get rid of them look me up.
 
i have been looking at 024 dv's myself and came along this website with a way cheaper price than expected what u guys think thanks
http://www.dieselpowerproducts.com/p-5246-peak-diesel-delivery-valves-94-98-59l39l-cummins-12-valve-and-4bt.aspx

Sent from my DROID BIONIC using Tapatalk
 
Last edited:
How much gain is it from a 181 to 024 I took out my full cuts and now it's a dog on bottom end


Sent from my iPhone using Tapatalk
 
Ok can u have a 181 cut to 022 I switched from full cut to 181 n absolutely hate the 181


Sent from my iPhone using Tapatalk
 
How much gain is it from a 181 to 024 I took out my full cuts and now it's a dog on bottom end


Sent from my iPhone using Tapatalk

I was told...

024's add 50cc +/-
191's add 60cc +/-
Full Cuts add 140cc +/-

Thats over 181's.
 
Could be??? I was just relaying what i was once told by Weston. I had assumed he meant those figures were over 181's.
 
Back
Top