hook up for lift pressure

[Shambo]

I have a 150-2008 lift pump on my 2003 dodge I want to hook up my lift pump fuel pressure guage on my quadzilla commanger. due to the hook-up of my fass pump i was wondering if there was a spot on the pump itself I can hook up the sending unit?

Rodger

[JacktheBear3]

what is the port / sender mounting size?

and is your pump an HPFP model or FASS 150/150-1008 complete air seperation system?

[Shambo]

The sender is 1/8 pipe and the pump is 150/200-1008 water air separator. less than 2 months old.

[Diesel-Dan]

We have a port on the side of the pressure manifold. BUT these work good too:

http://www.jegs.com/webapp/wcs/stores/servlet/product2_10001_10002_746566_-1

At Power By Poole
http://www.powerbypoole.com/6&8-pressure-port.gif

Vulcan Performance
http://www.vulcanperformance.com/catalog/08-Fuel-Pterssure-Tee.gif

[Shambo]

Which port on the pump would I use.

[Diesel-Dan]

Its an old school pic....but you get the point.....

http://www.kensps.citymaker.com/i/sidespecs150tn_.jpg

[Shambo]

Thanks I'll have a look at it this weekend