PDA

View Full Version : Part #


cumins01
11-12-2012, 05:35 AM
I hope this is in the correct section. I'm remote mounting my alt down where the a/c compressor used to be. The factory a/c compressor bracket also has the lower radiator hose connector built into it and alt lower mount. looking to remove the bracket compeletly but now I need the connector that the lower radiator hose will go to. Any one have a part number off a Industrial/ Ag 5.9 so I can order one?
Thanks!

BenM
11-12-2012, 06:20 AM
Post this or maybe a Moderator will move this to sponsors section for Jeff.

If not contact Jeff @ Mumau Diesel. If its a Cummins part. He can find it. If they still produce it he can get it.

(724) 354-3136

cumins01
11-12-2012, 07:54 AM
Thanks BenM

SoDak24valve
11-12-2012, 11:41 AM
Also you can try a local Case/ Cummins dealer. That`s who i order all my parts from anymore, very cheap. All you need is the part# or the engine # off the front timing cover and a detailed description of what your looking for.

RacinDuallie
11-12-2012, 01:12 PM
Also you can try a local Case/ Cummins dealer. That`s who i order all my parts from anymore, very cheap. All you need is the part# or the engine # off the front timing cover and a detailed description of what your looking for.Fail- Mumau Diesel is the best damned service and price anywhere on factory Cummins parts. If you don't know this-then you have not been here awhile or you don't pay attention......$.02

ClamDigger4
11-12-2012, 02:31 PM
Fail- Mumau Diesel is the best damned service and price anywhere on factory Cummins parts. If you don't know this-then you have not been here awhile or you don't pay attention......$.02

Agreed

from phone

cumins01
11-13-2012, 05:25 AM
I sent him a PM. Is it better to just call?

Snedge
11-13-2012, 06:46 AM
try # 3903102
There are a ton of configurations for the water inlet.

Cumminsfever
11-13-2012, 06:49 AM
Fail- Mumau Diesel is the best damned service and price anywhere on factory Cummins parts. If you don't know this-then you have not been here awhile or you don't pay attention......$.02

I have gotten better prices on a few parts at other places. But I usualy use Jeff, as his service is top notch, and I don't mind paying a man more for his parts when he has service to back up his parts.

cumins01
11-13-2012, 07:40 AM
Thanks Jeff! Do you by chance have a configuration like the factory just without the rest of the bracket?

Snedge
11-13-2012, 08:03 AM
How about this one? 3910159
For some reason this one rings a bell with me.

cumins01
11-13-2012, 08:48 AM
That's close. I will have to look at mine tonite. Do I need bolts to or should I be able to use mine over?

cumins01
11-19-2012, 06:46 PM
Jeff, you have another one that looks close to that? How bout the cost for a set of 24 tappets? I've been quoted 202

cumins01
01-23-2013, 05:17 AM
How about this one? 3910159
For some reason this one rings a bell with me.

Jeff for some reason this part number is no good. Not sure why. I'll call you for the parts when ready to order. You blew my local dealer out of the water!