PDA

View Full Version : New Airdog 4G HD Pump!


Cozze44
03-15-2013, 12:21 PM
Just put it in last night! Amazed at how quiet this thing is, only way I knew it was on was to put my hand on it, and definitely runs better then with my old Airdog 1. :rockwoot:

Let's see how long it lasts!

SuperDave4x4
03-15-2013, 12:26 PM
Since it's 4G, do we need a data plan? Also does it have Bluetooth?















LOL


I look forward to hearing more about this pump.

RockinRam96
03-15-2013, 12:57 PM
Specs?

Red_Rattler
03-15-2013, 06:12 PM
Wifi capable and blue tooth syncs to you smart phone to show you real time pressures and flow rates LOL

collin_bucko
03-16-2013, 10:13 AM
Wifi capable and blue tooth syncs to you smart phone to show you real time pressures and flow rates LOL

That would be sick

2Tone12V
03-18-2013, 10:23 AM
Pretty sweet huh? There are some very sweet things going on here. We addressed the seal issue we created by trying to address a general, long term seal issue. The testing we've done on aeromotive and fuel lab style pumps prove the longevity of those motors aren't as good as what we use now. So we found a way to eliminate the seal from our current style motor. Still doing some testing but it looks like this may be the ticket. And WOW are they much more quiet. You literally can't hear them running at all.

duck_04
03-18-2013, 10:28 AM
Pretty sweet huh? There are some very sweet things going on here. We addressed the seal issue we created by trying to address a general, long term seal issue. The testing we've done on aeromotive and fuel lab style pumps prove the longevity of those motors aren't as good as what we use now. So we found a way to eliminate the seal from our current style motor. Still doing some testing but it looks like this may be the ticket. And WOW are they much more quiet. You literally can't hear them running at all.

I just installed a 165 on an LMM about a week ago, and I had to put my hand on the motor to make sure it was running. He didn't have a fuel pressure gauge, so I couldn't tell if it was. It was a huge improvement over pumps in the past.

madmikeismad
04-14-2013, 03:47 PM
well damn, now I want 5 of them.

mikmaze
04-14-2013, 04:31 PM
make sure you send your warranty card back via registered mail.......... they will not send you a letter stating that it didn't arrive.

LReiff
04-17-2013, 03:01 PM
Pretty sweet huh? There are some very sweet things going on here. We addressed the seal issue we created by trying to address a general, long term seal issue. The testing we've done on aeromotive and fuel lab style pumps prove the longevity of those motors aren't as good as what we use now. So we found a way to eliminate the seal from our current style motor. Still doing some testing but it looks like this may be the ticket. And WOW are they much more quiet. You literally can't hear them running at all.

Well Anthony, can you sell me one?

ControlFreak
04-17-2013, 03:21 PM
Also interested. Is this marketed as an AD2 or is it considered a new product?

tony597fitter
04-17-2013, 07:16 PM
I put mine in about 2 weeks ago and it is so quiet you cant even tell its running!
I havent dynoed with it yet, but my truck definatly faster according to the butt dyno.

Not to rub it in, but all you guys are already living in the past, LOL!
Im running the AD2 4g 200gph !!
I think Im the only one running it as of a couple weeks ago according to Charie.

RAB 38
04-17-2013, 07:48 PM
i have been running one now for 2-3 weeks, and yes it is extremly quiet and holds 30psi no problem

91shelbydaytona
04-25-2013, 01:03 AM
Whats the price and avalability on these pumps?

LReiff
04-29-2013, 07:58 PM
Anthony sure seems to be elusive at times. It would be nice to know where one can find a 4G pump.

Cozze44
04-29-2013, 09:21 PM
Call Pureflow!

91shelbydaytona
04-30-2013, 12:46 AM
Already did, I was told they have been running them on over the road trucks for awile but dont know if/when they could be released for pickups

inline6power
04-30-2013, 12:50 AM
Call fuel lab.

Sent from my SCH-I605 using Tapatalk 2

Gibson
05-27-2013, 11:54 PM
Call fuel lab.

Sent from my SCH-I605 using Tapatalk 2

Hmmm that's nice. Not!

wwm
05-28-2013, 12:02 AM
what is the 4G mean?

madmikeismad
05-28-2013, 01:52 AM
4th generation?

Jordan Koehn
05-28-2013, 01:53 AM
So since I've already had one pump go out, didn't get it warrantied cause I didn't send in the card and my new pump is making a funny noise, do I get a free upgrade??

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Hammer
06-02-2013, 08:21 PM
Pretty sweet huh? There are some very sweet things going on here. We addressed the seal issue we created by trying to address a general, long term seal issue. The testing we've done on aeromotive and fuel lab style pumps prove the longevity of those motors aren't as good as what we use now. So we found a way to eliminate the seal from our current style motor. Still doing some testing but it looks like this may be the ticket. And WOW are they much more quiet. You literally can't hear them running at all.

Thats good to know so when Lee calls in the warranty on mine it will be the new style correct?.I'd hate to have to put another motor on top of my ADII that can not maintain pressure like the current is doing.

Now as for my AD 4G that we put on my 2005 truck.....
It certainly has fixed the pressure loss issues we have been having and its very quiet,unlike the ADII DF-165 that had been on the truck previously.The ADII would start at 20psi and pull down to 2psi under a full throttle run and it didn't matter what filters were on it.Lots of work to do tuning and we will see how much better this pump will prove to be in the long run but for now it looks very promising and it has cured my loss of pressure under load.

USARMY12V
07-07-2013, 01:10 PM
How much difference is there between these new pieces and the AD II 165 I got in the fall? Any way to simply upgrade? Pump hasn't made its way onto the truck yet due to other problems and issues.

Cozze44
07-07-2013, 01:23 PM
So far from what I can tell, almost no pressure drop, practically silent, and hopefully longevity. Haven't had a 4g pump apart, but I know the base that came with it was different then my Airdog 150, and the motor was bigger.

nasty 2005
07-07-2013, 01:30 PM
Make your life easier and just run a fass!

USARMY12V
07-07-2013, 01:33 PM
Cozze was your 150 an AirDog or II unit?

GreenMeanie5.9
07-07-2013, 01:52 PM
I dont have a 4g series but i can tell you my 200 gph is silent compared to the fass 150 i had! I love my airdog!

Gibson
07-07-2013, 02:06 PM
I dont have a 4g series but i can tell you my 200 gph is silent compared to the fass 150 i had! I love my airdog!

My fass 95 is a loud biatch. It starts at 14psi idle and draws down to 1-2psi at WOT. And I'm all stock with a smarty. I think it's time to go dual pumps, Exergy injectors and new lift pump.

Cozze44
07-07-2013, 09:24 PM
I had an Airdog 1 before, could hear that over the engine lol.

Red_Rattler
08-27-2013, 06:14 PM
Had my 165 go out on the way home from Scheids and now I have a 4g coming in the mail. Ill post some pics when it shows up

GreenMeanie5.9
08-27-2013, 06:19 PM
My fass 95 is a loud biatch. It starts at 14psi idle and draws down to 1-2psi at WOT. And I'm all stock with a smarty. I think it's time to go dual pumps, Exergy injectors and new lift pump.

Booooyaaa great idea. Put that airdog to work!

straight 6 roar
09-04-2013, 05:14 PM
When and where are they going to be on sale?

mikmaze
09-04-2013, 08:53 PM
price? 4 g's

Cozze44
09-05-2013, 10:05 AM
When and where are they going to be on sale?

price? 4 g's


Top Secret right now I guess!

2Tone12V
10-08-2013, 02:55 PM
Top Secret right now I guess!

I haven't set a price yet or even decided if I will release it. Extensive testing has to be done first. All signs show it's better all around. But how much better...? There are things about it that engineering likes that I HATE! However testing will win out and show what's best. If it proves me wrong and shows to be a better pump in the long run. I'm A ok with that for sure. So far so good though. It def pumps a ton more volume, it's def much quieter, it's def easier to maintain. However, more goes into it which raises the cost. Don't take offense to this. But I don't care if we can't run any competition only vehicles or not. I want something that will last forever. If it turns out to be enough volume for the others, GREAT! Sweetens the deal. Which as you can see it does. Anyhow, engineering is doing lots of testing and documenting on it as we speak. Once they get their info. We will put our heads together and determine what the next step is going to be.

Red_Rattler
10-09-2013, 05:59 AM
Well I love mine so far!