PDA

View Full Version : 5x.018" Sticks


97' CTD
02-28-2008, 06:23 PM
As stated 6 - 5x.018" injectors done by Southern Diesel Performance. Ran good but changing some stuff up when I get my pump done at CDS. Smoked some at idle but cleared when warm. (Ran Good) :clap:

$450.00 Shipped + Need some cores

Brandon

97' CTD
02-29-2008, 05:34 AM
TTT
Brandon

Ken in AZ
02-29-2008, 10:41 AM
these stock spray pattern?

97' CTD
02-29-2008, 11:01 AM
Yeah, just opened up from a stock stick to .018" IIRC.
Brandon

97' CTD
03-03-2008, 06:29 AM
$400.00 Plus cores, need em' moved come on folks.
Brandon

97' CTD
03-10-2008, 08:34 AM
Come on, u tellin me no one needs bigger sticks? $450.00 (NO CORES NEEDED)
Brandon

Stangpwr71
03-10-2008, 10:24 PM
What horspower are these about at?

97' CTD
03-11-2008, 12:39 PM
I would venture to say about (175 HP) if I had to put a rating on them.
Brandon

Dodgentwo
03-14-2008, 10:38 PM
What are they in comparison to a set of 370's? bigger smaller? Sorry for the dumb questions. These are 5x.018, do you know what 370's are? Thanks

Muddin_dude06
03-14-2008, 11:19 PM
370's (80hp injectors) are 5x.012", 435's (140hp injectors) are 5x.014". I would venture to say the 5x.018" would be about 225hp-240hp IF everything was perfect IMO...

SMOKIN93
03-15-2008, 12:12 AM
What size holes are ddp 4's?

9 LIVES
03-15-2008, 08:27 AM
5X.014 140hp

Willy91
03-17-2008, 08:01 AM
do you still have these? Any interest in a set of 5x16's?

Bosshawg600
03-21-2008, 04:38 PM
Still got'em? I Need to upgrade to a better injector!!!!

97' CTD
03-25-2008, 10:56 AM
Sorry Still Got em'.
Brandon

fordsux8269
03-25-2008, 11:16 AM
Do you have a video of your truck with these in it

97' CTD
03-25-2008, 03:30 PM
Do you have a video of your truck with these in it

No sorry :(
Brandon

Highfinance97
03-25-2008, 03:40 PM
Do you have a video of your truck with these in it


Here is my truck when it had 5x0.18's

Reedsville 06 (http://youtube.com/watch?v=2KTTCtlH2qk)


I thought maybe i could help, this thread has been going for a while :bang

97' CTD
03-25-2008, 05:42 PM
Here is my truck when it had 5x0.18's

Reedsville 06 (http://youtube.com/watch?v=2KTTCtlH2qk)


I thought maybe i could help, this thread has been going for a while :bang

Thanks Buddy!
Brandon

Bosshawg600
03-25-2008, 08:42 PM
are they in your truck now? I might have the money by the time the dyno day rolls around!

97' CTD
03-25-2008, 08:53 PM
are they in your truck now? I might have the money by the time the dyno day rolls around!

They are sitting on the bench capped on both ends ready to ship or deliver or how ever U want em'......Where U about in indy north or south of Indianapolis?
Brandon

Bosshawg600
03-25-2008, 11:39 PM
Jusr east of Indy in Anderson between noblesville and muncie. I realy debating weither these will work good or not. Found out I have 370's and I need something better!

Highfinance97
03-26-2008, 06:21 AM
debating weither these will work good or not. Found out I have 370's and I need something better!


I went from 370's and 16degs. of timing to MY 5X.018's and 20 degs.

egts went down about 150-200 degs., smoked less at idle,
and the power differance.........WOW

zstroken
03-26-2008, 06:40 AM
Jusr east of Indy in Anderson between noblesville and muncie. I realy debating weither these will work good or not. Found out I have 370's and I need something better!

Do you have a 12V head on your 98.5??

Bosshawg600
03-26-2008, 11:19 AM
Do you have a 12V head on your 98.5??

I dont, but I think I can run 12v injectors on it. I have 12v injectors on it right now. Not sure how the make it happen but I think it some kind of sleve or spacer.

AsTroSS
03-26-2008, 11:28 AM
I dont, but I think I can run 12v injectors on it. I have 12v injectors on it right now. Not sure how the make it happen but I think it some kind of sleve or spacer.

How you can use 12 v injectors in 24v Head ? They are totally different, 12 V have angel/offest spray pattern

Bosshawg600
03-26-2008, 04:08 PM
I realy dont know how they did it. Ive heard it can be done, but I have a set of marine 370's in my truck now and these injectors would be a HUGE difference!

And my timing is going to be changed nexct week. Its at a sad 16* and should be up it the 20-22 range (whicxh ever runs better)

cumminsram
03-26-2008, 07:10 PM
Does your truck run crossover tubes or custom lines? Thats really interesting.

Highfinance97
03-26-2008, 07:47 PM
:bs:

Sledpuller
03-26-2008, 07:51 PM
That video was pathetic.:kick:

Here is a better one: 5x.018, 180 pump, cut D Valves, Holders, Ht-60

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&VideoID=4193372

Thats the difference between an over fueled kid, and a properly tuned proffesional!!:hehe::hehe::hehe:

Highfinance97
03-26-2008, 07:56 PM
:bow:OH SLEDPULLER WER'E NOT WORTHY,WER'E NOT WORTHY


Your still ungreatful!!!! LOL


On edit: That pull was with my B1

Sledpuller
03-26-2008, 08:04 PM
hehehehehehehehehehe:rockwoot:

97' CTD
03-26-2008, 09:04 PM
SALE PENDING! :woohoo:

Brandon

Sledpuller
03-26-2008, 09:38 PM
Obviously, Sleddy ROCKS.:cheer:

coady
03-27-2008, 02:11 PM
if you will take 350 i will buy them today and send you a check tonight. call me at 217-823-2577.

rileydsking
03-31-2008, 03:33 PM
still have them??

97' CTD
03-31-2008, 04:40 PM
SOLD

Thanks to CompD and a couple members ;)!
Brandon