PDA

View Full Version : what is the hp on a 7.3 stock


02psd7.3
08-27-2006, 04:52 PM
i have a 2002 f250 with a 7.3 6speed 4x4

what is the stock hp and torque

thanks
tim

Burner
08-27-2006, 08:42 PM
David Dunbar could tell ya better than anyone. He owns they Dyno that many fear. :evil ......DPM. :rockwoot:

02psd7.3
08-27-2006, 08:46 PM
ok thanks i guess i will wait till he sees this thanks

Billysgoat
08-28-2006, 02:15 AM
Tim I moved this over to the 7.3 forum, I feel certain the Ford guys can answer this right quick like.

IIRC it is about 250HP flywheel, with a standard tuner intake and exhuast they will churn out about 250-60ish RWHP on the dyno.

DCSpecial
08-28-2006, 07:49 AM
If you look on the valve cover on the passenger side of the motor...there should be a International Sticker or something with the HP and TQ specs.

Different motor/trans combos had different figures each year

Burner
08-28-2006, 09:17 AM
6 speed should be 275 and the auto should be 250 if memory serves me right.

02psd7.3
08-28-2006, 04:55 PM
ok i will have to look and let you know

and also how are chip hp numbers figured at the block or rear wheels

chevyguy
08-28-2006, 05:13 PM
With the TS chip the HP numbers are measured at the rear wheels. I'm not sure about any other chip or programmer.

02psd7.3
08-28-2006, 08:19 PM
it says 275 and i have a 90 hp banks chip so i pron have like 330 rwhp right?

DCSpecial
08-28-2006, 08:22 PM
I'd venture a guess of maybe around 300 rwhp if you're lucky with that 90hp Banks.

02psd7.3
08-29-2006, 03:50 AM
well you know what that maens bye bye banks hello ts (when i grt some cash got bald tires now) LOL

drmiller100
09-05-2006, 10:08 PM
so my 99.5 6 speed showed 220 rear wheel horsepower stock. 211 on another dyno.

336 RWHP with a DP tuner. that is with a 50 dollar TYMAR intake, 50 dollar BTM, and religoius tightening of intercooler clamps.