dynoed my PDI built rig

[82ndsnpr]

hey boys just letting you all know i dynoed my black mega got 550 on the rollers, making a few changes like dumping the pmt and going smarty got the 625 studs comming so i can crank the boost and working on a line on the dual cp3s. trying to figure out a stack to run with the smary if you boys got any ideas let me know so far im looking at a tst with mp8

[kmkdiesel]

try keeping the pmt and stacking with a tst

[82ndsnpr]

so what tst are you saying new to the boxes only press box i have seen is the mp8, what tune do you run in the pmt i tried to load the crazy larry and that should have been what it was on when i ran my three runs on the dyno

[dzlfarmboy]

What are the goals your looking to reach?

[haloman]

Sounds like you are working at it. Stack a TS-MP8 with that smarty for some additional fine tuning. The TST might not even be availible for your truck depending on what month in 06' it was built.

[Pdidiesel]

Finding a good stack is really just taking the time and money to purchase different products and spend all day on a dyno. Without the dyno numbers to back up the claims a lot of the stacks you'll find out there are really just people blowing smoke. They think that they can feel it by the seat of their pants but have never put their truck on a dyno to find out for sure. My suggestion is not to waist the money doing this and instead invest it in a reliable power gaining method, Injectors. You can get new body injectors for about $425 each, this might be more money than a stack but you have the options for greater power gains and a smoother ride.

If you choose to go with a stack, our suggestion is to contact manufactures and see if they are willing to open up to you and reveal the kind of tuning used to create the power, you don’t want to over load your engine with too much timing and you will want to check as see if you have enough fuel pressure to handle those tunes that require huge fuel demands.

If you can truly find the Crazy Larry out there after its been removed from Bully Dogs Site, you could choose to run that. The one that was available for the PMT wasn’t the same as the older versions that you can find for the Triple Dog. There are different versions out there that can help, some that will allow you to turn up your rev limiter and turn off your torque management. These can be found if you just ask around, somebody will have them saved to their computer for safe keeping and be willing to email the file to you.

[82ndsnpr]

i am running 90hp II sticks that pdi installed for me and i have the crazy larry installed on the PMT i dont know which on it is but PDI put it on my PMT for me a week or so ago. As for the stacks i feel you with the dyno i thought we had one lined up for a few hours untill they found out we were going to run diesel trucks on it then they backed out. I am buying studs so i can crank the bullet up and get more boost out of it just looking for a way to get the pressure up to the sticks.

[82ndsnpr]

oh we are looking to get into 700+ hp on single turbo then down the line i will go twins but got to convince the wife first so taking it slow right now.

[Pdidiesel]

oh we are looking to get into 700+ hp on single turbo then down the line i will go twins but got to convince the wife first so taking it slow right now.

Shouldn't be to hard just go buy her something first, that will make a soft spot and after that you can tell her the good new about your new truck parts.

[82ndsnpr]

yea the boys at pdi are my heros when i had the truck built she went in to pay and was crying she was emotional since i was in iraq but they calmed her right down and told her it was all worth the cost and once she drove it she loved the truck so much she wants to buy another and build her one

[kmkdiesel]

yea the boys at pdi are my heros when i had the truck built she went in to pay and was crying she was emotional since i was in iraq but they calmed her right down and told her it was all worth the cost and once she drove it she loved the truck so much she wants to buy another and build her one

I gotta find me a wife like that