View Full Version : Turbonetics T-106
Jim Fulmer
07-07-2008, 08:42 PM
Turbonetics T-106 Ceramic Ball Bearing, 1.32 A/R housing and in excellent condition, Recent (2 weeks ago) tear down and check, very little run time prior to check out.
Comes with exhaust flange T-100 for your hot pipe, oil inlet flange 1/4" pipe thread and a gasket kit.
3" V-band flange welded on outlet.
Turbo is rated at 180lbs/min at 3.6 P/R.
Turbo map via E-mail.....pdf file.
9807
9808
9809
Size comparison to a Silver Bullet
9810
Retail price is $3900 at Turbonetics and $3600 at Forced Inductions.
Priced at $2500.00 OBO
Buyer pays shipping and Paypal is accepted.
Jim
Jim Fulmer
07-07-2008, 08:43 PM
Also avaliable are several wastegates to make a package deal.
A total of (2) Turbonetics Extreme Wategates with (1) Q-Bellows. (1) Tial 44mm gate used and (1) Tial 38mm gate new in the box.
Make offer on package deal!
9811
9812
9813
Jim
roachie
07-07-2008, 08:49 PM
Just had to put it next to a silver bullet didnt ya.:evil
Jim Fulmer
07-07-2008, 08:56 PM
Just had to put it next to a silver bullet didnt ya.:evil
It's the only thing I had, might shoot some tape measure pics too.
I joked on the thread about it but it will actually fit fairly well, I have a pic of it mounted on the 01' but you can't see clearences.
Jim
Jim Fulmer
07-07-2008, 08:59 PM
I do have a down pipe they used on the 01, it will come with it too.
Jim
roachie
07-07-2008, 09:30 PM
The thing will fit between the frame and engine?
Jim Fulmer
07-07-2008, 09:39 PM
Actually better than I thought when first looked at it. I know it would fit as it did in the 01' 4x4.
These were the pics I took when I was thinking.
9814
9815
9816
Jim
roachie
07-07-2008, 09:50 PM
Looks like an elephant in a shed, but it is in there. Still havent gotten an answer on what to use for the secondary.
Jim Fulmer
07-07-2008, 09:56 PM
Silver Bullet at a minimum or a K-31 as a guess......both with an external gate!
Last and the most expensive would be a T-4 turbo! I do know turbonetics has a 1.10 housing for it too.
Jim
9 LIVES
07-07-2008, 09:59 PM
I will gladly pay you Tuesday* for a turbo today sir. :evil
*Tusday july 7th 2009:doh:
Man I gotta see if the old lady will let me drop the next 2 months mortgage payments on her! I really want that hunk of shiney loving mass of make me warm in the pants parts :woohoo:
roachie
07-07-2008, 10:07 PM
I really want that hunk of shiney loving mass of make me warm in the pants parts :woohoo:
That is the best parts desription ever. EVER.LOL
I gonna wave some cash a a civic this weekend, shortly there after Ill be hoping I can beat everbody else to your mailbox.
Jim Fulmer
07-08-2008, 06:03 AM
I had invisoned a T-72 (yes I know were to get one reasonable not retail) using the (1) extreme gate then the 106 with the current housing or a 1.10 and a smaller gate on the hot side, I think this is about the size that Meacham(sp)runs on pro truck.
While you thinking about it keep one thing in mind O.B.O. The 4 of you that PM's me about it earlier have first dibs.....yes I have your names.
Jim
9 LIVES
07-08-2008, 06:28 PM
What comes with the turbo included in the price. I know you went over a bunch of gates,dp etc.. etc.. that are for sale. Not sure if those are included in price?
Jim Fulmer
07-08-2008, 08:44 PM
Out of the original piping I got very few pieces but I did get the flange for the hot pipe inlet, I cut the pipe off long so the user would have the transistion to it (4" pipe). I have a gasket kit fro the turbo and a small flange for the oil inlet but no outlet drain. The down pipe that was built will come with it and an exhaust V-band.
Gates were originally separate!
Jim
Jim Fulmer
07-08-2008, 09:32 PM
9853
9854
Down pipe if anyone wants it or not with the Turbo.
Jim
Jim Fulmer
07-12-2008, 10:39 AM
TTT.....I'll give it another week before it goes to E-Bay, offers are accepted!
Jim
SuperSonic
07-14-2008, 07:16 PM
PM Sent.
Jim Fulmer
07-14-2008, 08:53 PM
Sale Pending
Jim
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.