PDA

View Full Version : P-pumped 24V Chevy PICS


12valve
07-27-2008, 10:07 PM
Hey everyone, this is the first time i saw there is P pump section on here...

Well Im not new to Ppumps, anyway i went to the local shop the other day and saw they where building a 97 chevy with a 24 cummins with a p pump on it. There have been many many conversions of this type in my area i could probably think of 10 right away.
One guy has a chevy like that with a fully functional CR in it, his brother has a Ppumped CR in a chevy...
They also used Ppumped 24vs to pump water at wells with no electricity access...

so, here are a couple of pics,
They bent the OEM 24 lines to fit onto the Ppump
MAchined the OEM 24 timing cover to accept the pump
No intercooler (its a chevy)
Itll have a manual tranny

roachie
07-27-2008, 10:10 PM
I was under the impression that there want enough meat on the VP timing cover to machine to p-pump specs.

12valve
07-27-2008, 10:18 PM
I've seen a machined cover, but its a while ago, and im not sure how it was, but ive been told that, IIRC there was something installed in the cover with the studs to hold the pump (something like a big ring) id have to look it up

Diesel Freak
12-10-2008, 10:38 AM
TTT I am also currious as to how the cover was modified

SHughes
12-10-2008, 07:16 PM
X2!!

ericjk42002
12-10-2008, 07:37 PM
I would like how he bent the stock lines so well

Tate
12-11-2008, 01:57 AM
I would like how he bent the stock lines so well

Thats what I was thinking, those lines look great for being rebent.

hyper14h
12-11-2008, 03:41 PM
i no this is completly off the subject but can u get some more pics and info in the chevy to cummins conversion i am in the process of doing one my self i have a 97 chevy it had a 6.5 in it i put a treight axle under it and a cross over steering and i had to buy a specal pitmment arm just to be able to get the hood closed with very little clearences between the valve cover and the hood and i seen he has his intake going over the valve cover any little tid bit can help thanks

CatDoctor
01-04-2009, 08:29 PM
any pics or info of how the front cover was machined for the p pump