PDA

View Full Version : injectors


big blue diesel
10-02-2008, 09:19 PM
i was wondering if it is possible to put injectors out of a newer 7.3 (99-03) in a obs 7.3 (97). i know old body 7.3's have 90cc injectors and newer 7.3's have 120cc injectors. just wantin to know if it is possible and if it would be a good "performance" upgrade. also where is a good place to find ladder bars. i need them bad.

greenbeast
10-02-2008, 09:31 PM
It is a good upgrade, but you will need to get split-shot programing for your OBS to make it run right. You should look in to a DIY injector kit and do your own 160cc single shot injectors.

PSD0389
10-03-2008, 09:52 AM
Yeah switching those injectors over is a lot more work, i would go the DIY route as well I pulled my stock injectors out and sent them to DIY injectors to be rebuilt and they are now on their way back to me it was only 475 bucks

big blue diesel
10-04-2008, 01:19 PM
where do i get the info for the DIY injectors

pontiacross
10-04-2008, 10:24 PM
you would also need to get a bigger hpop to run the split shot injectors to get all the good out of them because they use alot more oil. the 99.5 and up trucks have a 17degree pump and we have a 15degree.

PSD0389
10-05-2008, 12:39 PM
Check out DIY-Injectors.com for the DIY injectors

big blue diesel
10-07-2008, 07:45 AM
wow they r a great price. im probablly gunna get the stage 1's. i dont have to do anything to my fuel system to be able to run these stage 1's do i? the only reason im asking is they say they are up to a 110 hp inceasre? so will my stock fuel system be able to handle pumping that much fuel?

PSD0389
10-07-2008, 08:02 PM
With Stage 1s your stock fuel system will be fine