PDA

View Full Version : Stand Alone for 6.0


Santa Gertrudis
11-25-2008, 11:02 PM
Is there an AirDog system that will work as a stand alone pump and hold 60 psi? Thanks!

SG

PSDPlayer
11-26-2008, 08:58 AM
Raptor.

Santa Gertrudis
11-26-2008, 11:34 PM
Well if that is indeed the case, I will be buying a FASS for sure. I dont want to buy a Raptor AND a 150.

SSpeeDEMONSS
11-29-2008, 01:13 PM
wait until the beginning of december. the new pump is coming out.

Garrett

Santa Gertrudis
11-29-2008, 11:36 PM
Alrighty! Thanks Garrett

2Tone12V
12-01-2008, 02:02 PM
You ready for the new pumps. They will be here this week or next!

SSpeeDEMONSS
12-01-2008, 04:38 PM
there better be pics, prices, and details up ASAP!

Garrett

2Tone12V
12-01-2008, 05:09 PM
there better be pics, prices, and details up ASAP!

Garrett


You give me better pics and Ill give you better prices! Oh and gotta have the details!!

2Tone12V
12-01-2008, 05:09 PM
Just kidding. Ill get you the info asap this week.

bdp
12-01-2008, 05:55 PM
Will the new pumps be capable of holding 60psi in the AD system? If so I have some good Ford uses for that.

Santa Gertrudis
12-01-2008, 11:15 PM
If youre coming out with one that will hold 60 psi, Ill buy that instead of your main competitor. Im sure it will be cheaper. PM me a price if you dont mind.

SSpeeDEMONSS
12-03-2008, 01:30 PM
so whats the word?

Garrett

2Tone12V
12-03-2008, 02:38 PM
Im having a heck of a time gettin the pic up. So until I get it heres some details. Return line is 1/4" instead of 1/2" now. It has an adjustable regulator as well. Fuel that has had air removed but is not needed is no longer sent back to the tank to foam back up. But recirculated around the base and will be on hand for the motor demands. Pic will be up soon.

SSpeeDEMONSS
12-03-2008, 02:47 PM
1/4" aw wtf. so im going to have to change a couple things. just post away as soon as you get it up.

Garrett

2Tone12V
12-03-2008, 05:31 PM
1/4" aw wtf. so im going to have to change a couple things. just post away as soon as you get it up.

Garrett


Here we go. The pic shows the 1/4" return as well as the adjustable regulator as well.

hpprose
12-03-2008, 05:51 PM
Do you have a flow chart? I'm looking for flow vs pressure. Thanks,

Fuzzys69
12-03-2008, 06:04 PM
so what would i have to do to switch to this from my fass system. i dont want to pull the tank again. can i still reuse the lines and everything?
Also does the reguire the bigger pick up tube?

2Tone12V
12-04-2008, 10:42 AM
so what would i have to do to switch to this from my fass system. i dont want to pull the tank again. can i still reuse the lines and everything?
Also does the reguire the bigger pick up tube?

It will require a 1/2" suction tube. If you already have this installed you may connect to the existing tube. It will also need 1/2" fuel hose that comes standard with the kit. As far as switching your fass out goes. Im sure there will be different bracket hardware as well. No drilling required for ours so unbolt the old and bolt up the new. So if you have the tube already you can reuse your lines and things as well. So it would be as simple as switching the pumps out. Let me know if you have any questions. Thanks

2Tone12V
12-04-2008, 10:44 AM
Do you have a flow chart? I'm looking for flow vs pressure. Thanks,

I have a chart. Have to scan it to get it on here. Ill try to do that later. I will tell you that the pump is 180gph @ 60 psi. Not up to 60psi. At 60 psi.

Santa Gertrudis
12-04-2008, 01:50 PM
When will they be available to order?

2Tone12V
12-04-2008, 02:01 PM
When will they be available to order?


They are available to order now. Wont get shipped til wednesday of next week. Just a little heads up to ya.

2Tone12V
12-04-2008, 02:07 PM
If you have any other questions feel free to give me a call. 573-694-5155 or if you want to order

Abrannan19
12-04-2008, 02:08 PM
what kind of prices are they gonna be say compared to the other 150/180?

Santa Gertrudis
12-04-2008, 05:38 PM
I may be getting one of these as a Christmas gift, what do I need to tell them to order on the phone so that I get the right pump? Thanks!

Fuzzys69
12-04-2008, 05:52 PM
How much?

Santa Gertrudis
12-04-2008, 06:57 PM
Thats what I wanna know also ^. PM if needed.

Im sure it will prolly be cheaper than the competitor...

2Tone12V
12-05-2008, 10:23 AM
New pump is a bit higher than a regular AirDog. But more options as well. And an all around better unit. The unit is $702.05. Give me a call and I can get you fixed up. Cell number is 573-694-5155. Thanks

hpprose
12-05-2008, 10:26 AM
Is the 702 for the pump only or the whole 6.0 Kit?

2Tone12V
12-05-2008, 10:59 AM
Complete kit. Water proof harness, 1/2" hose, fittings, etc. AND.... You do not HAVE to put the suction tube in. If you get to the point where you are not getting the fuel you want. Then it may be necessary. But you dont HAVE to. Im sure a few of you will like that part as well. New info straight from Charlie.

Santa Gertrudis
12-05-2008, 04:16 PM
So glad that you can use the stock pick up tube!

2Tone12V
12-05-2008, 04:46 PM
Ya im sure thats a big one for alot of people.

riggz
12-05-2008, 05:51 PM
So excuse my ignorance, but the Airdog II takes the place of having to use the Airdog and Raptor combo?

2Tone12V
12-05-2008, 08:43 PM
So excuse my ignorance, but the Airdog II takes the place of having to use the Airdog and Raptor combo?

That is correct. Only the the AirDog 180/240. Other engineering changes to be made specifically for the Fords and there high pressures needs are being done as well on other pumps. No time table for it though. The DF 180/240 is to cure our empty spot for the Ford standalone.

UpstateDiesel
12-05-2008, 10:59 PM
This sounds like a nice setup. Chris

riggz
12-05-2008, 11:13 PM
That is correct. Only the the AirDog 180/240. Other engineering changes to be made specifically for the Fords and there high pressures needs are being done as well on other pumps. No time table for it though. The DF 180/240 is to cure our empty spot for the Ford standalone.

Excellent! Thanks for the info. Hopefully when my new job starts I can get some cash flow to splurge on this.

Santa Gertrudis
12-06-2008, 12:23 AM
I may be getting one for Christmas!

Santa Gertrudis
12-06-2008, 01:37 PM
So are you still going to have to drop the tank then? Do you have a PDF of the install instructions by chance?

SSpeeDEMONSS
12-06-2008, 01:54 PM
So are you still going to have to drop the tank then? Do you have a PDF of the install instructions by chance?

i think, thinking back to when i did mine, that you may be able to leave the tank in if you arent going to add the larger pickup. but, i recommend doing it. it really isnt that difficult and while you're in there you can harpoon it.

Garrett

riggz
12-07-2008, 05:26 PM
Is it more noisey vs. the Airdog I ?

Santa Gertrudis
12-07-2008, 05:49 PM
I was told by 2Tone12V that it is mildly louder than the original AirDog.

2Tone12V
12-08-2008, 06:12 PM
Yep not much though.

Santa Gertrudis
12-08-2008, 07:55 PM
Is there a PDF of the instructions?

2Tone12V
12-09-2008, 11:49 AM
Ya give me an email address and I can get it over to you. Dont quite have the "complete" manual done. I can give you an AirDog install manual to give a little help. In the process of the manual right now. Gotta do an install with some pics.

Fuzzys69
12-21-2008, 05:01 PM
Has anyone tried this out yet?

hpprose
12-21-2008, 05:02 PM
I believe Colin is getting it for Christmas. So, I would imagine he will have it on his truck probably by the 29th.

Santa Gertrudis
12-21-2008, 10:57 PM
Yes, ive got one coming, but it will prolly be next week at the earliest before i even get it. There was something they werent happy with that they are changing before they ship them. Doesnt bother me much to wait though. I dont NEED it, and plus, I want AirDog to find the issues, not me. As soon as i get it on though, yall can bet that you will hear about it!

Dalpilot
12-22-2008, 12:21 AM
I am very happy with my setup, Airdog, and Raptor pump, but I am looking forward to the single pump.

Santa Gertrudis
12-22-2008, 01:48 AM
Did you order one too, Tim?

SSpeeDEMONSS
12-22-2008, 03:46 PM
i think ill be waiting until at least late january to order one. i want the bugs worked out first. ill keep my airdog as well tho just in case.

Garrett

Dalpilot
12-22-2008, 04:37 PM
Not yet Colin, when I ordered my Airdog and Raptor, I talked to Charlie about just this setup.

FaSSt9602
01-19-2009, 10:30 PM
Any word on this yet? I am looking to buy something soon as my fuel system is on the way too me! Price, availability?

Santa Gertrudis
01-20-2009, 09:02 AM
I still havnt recieved mine

2Tone12V
01-20-2009, 10:55 AM
Santa you are first on the list!! Should be no time at all and you will have it on your truck.

Dalpilot
01-20-2009, 11:01 AM
Sounds like its getting closer Anthony.

Santa Gertrudis
01-20-2009, 02:04 PM
Oh Im not really in a hurry Anthony, I was just making FaSSt9602 aware that they havnt shipped yet. No worries buddy.

2Tone12V
01-20-2009, 02:44 PM
Sounds like its getting closer Anthony.

Ya we THOUGHT we were there. But had a little confusion on 600 motors. So now we wait on new ones!!! But Charlie is going to eat a HUGE chunk of money in order to get the people that ordered one out asap. Apologize for the hold up.

Abrannan19
01-20-2009, 02:58 PM
Anthony, when are you looking to be able to ship them to other customers?

2Tone12V
01-20-2009, 04:33 PM
Anthony, when are you looking to be able to ship them to other customers?

:doh: Ill have to check on that one. Not looking good though!! If you need one though asap. Need to let me. Basically were eating all of our profit on these things to ensure customer satisfaction. Gotta do what we gotta do though.

Dalpilot
01-20-2009, 05:48 PM
Thats the way it is supposed to work. Good on Charlie.

Santa Gertrudis
01-21-2009, 11:17 AM
Like I said, no hurry here. Take your time! :)

UpstateDiesel
01-22-2009, 06:37 AM
Sounds like it will be just what many of us are looking for. Look forward to them hitting the market. Chris

R33615
03-03-2009, 03:54 PM
Just curious if anything has happened with this? Are they available yet?

Santa Gertrudis
03-03-2009, 04:54 PM
not that i know of. i canceled my order

R33615
03-03-2009, 05:08 PM
So are they really that behind that they couldn't get one out to ya?

2Tone12V
03-04-2009, 01:21 PM
By the way, Charlie said the parts were to be here this week or the beginning of next week. Apologize for the delay. But we had some problems with parts we received and refuse to send out a pump unless we are 100% sure it is going to be succesful. So with that said I will keep you notified on the status. Thanks


Anthony
PureFlow Technologies Inc.

Santa Gertrudis
03-04-2009, 10:18 PM
Its no problem, Anthony. I will re-order once they are available :D

SSpeeDEMONSS
03-05-2009, 01:36 AM
By the way, Charlie said the parts were to be here this week or the beginning of next week. Apologize for the delay. But we had some problems with parts we received and refuse to send out a pump unless we are 100% sure it is going to be succesful. So with that said I will keep you notified on the status. Thanks


Anthony
PureFlow Technologies Inc.

nice, im definately interested in this. id like to get a new airdog. not that there is anything wrong with mine, i would just like to have the new one.

Garrett