Cam for sled puller.

[wildmanben]

Need a cam for my sled puller. Nothing extreme. Stock bottom end with 12mm pump and 3" charger. What you got?

[wildmanben]

Called and left message. See how long it takes to get a return call:)

[RacinDuallie]

I already gave him a heads up Ben.

[wildmanben]

He gave me a call back already. Very knowledgable and taught me more than the other guys I talked to did.
Thanks!

[RacinDuallie]

He gave me a call back already. Very knowledgable and taught me more than the other guys I talked to did.
Thanks!Bill does not dissappoint. Did you make a selection? Drop in? Custom? Gear Retainment option?:woohoo:

[wildmanben]

Drop in with bolt on gear. Still running stock bottom end for now.

[Snedge]

Fletcher is brilliant, and comical at the same time. The guy makes me lose it. :hehe:


Glad he came through for you Ben.

[drodgers]

You won't be dissapointed. :rockwoot:

[wildmanben]

Should I get new tappets like the CR ones or are the originals going to be ok?

[bud300ft]

get new tappets what cam are you getting

[AsTroSS]

Should I get new tappets like the CR ones or are the originals going to be ok?

For 12V use original tappets , CR tappets advance too much

[wildmanben]

so get new 12v tappets or use the ones in there already?

[AsTroSS]

so get new 12v tappets or use the ones in there already?

Buy new 12V tappets.

[SHughes]

so get new 12v tappets or use the ones in there already?

Use whatever Bill recommends.

[SHughes]

Bill does not dissappoint. Did you make a selection? Drop in? Custom? Gear Retainment option?:woohoo:


Hey Jeff...How long does it take for Bill to get a cam finished and sent out??

[RacinDuallie]

Hey Jeff...How long does it take for Bill to get a cam finished and sent out?? I talked to him today on this and he said he was awaiting for some additional info on your buildup? And no contact number of yours? Did you get a PM?

[SHughes]

I did..thanks a lot, again. Got it all squared away.