P-Pump Conversion Pics. (kinda excited bout it)

[baprewitt]

Here are some pics of my recently completed ppump conversion. looks good i think and sounds even better. Im real excited about it! except for the fact i didnt know the 01's needed the cam sensor so i didnt bother with it. now that its all back together i realize the alternator isnt charging. but ill fix it. Im just happy i got the new cam, turbo, pump lines injectors etc on

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346733_1868.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346734_2057.jpg
http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346736_2249.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346742_3434.jpg
http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v289/159/86/586526519/n586526519_622004_9398.jpg

[Triple 7]

Looks good!!! :rockwoot:

Got any footage yet?

[getblown5.9]

what turbo and pump you running?

[zstroken]

I see stock intercooler boots?

[BearBeatsAll]

Where did you get everything for the swap?

[roachie]

I see stock intercooler boots?

Dont knock em. They've held 60 on my truck just fine.

[parttimepuller]

Dont knock em. They've held 60 on my truck just fine.


Not mine!!! 250 ft worth of 60psi and BOOM... One of the upgrades for me this year!!!

[jktcummins]

I wish yall would quite teasing me with the damn p pump swap pics. Makes me second guess my plans evertime. but hey i think every part i put on this damn vp truck the closer i get to jumpping ship.

[baprewitt]

I see stock intercooler boots?

That was just to get it running. New ones are on their way from Haisley's.

[baprewitt]

what turbo and pump you running?

13mm from II and S400 sx


I have a video of it in the shop after it ran for a while. just seein how it sounded bringing up the RPM's ill try and load it.

[JakeDiesel]

looks good man cant wait to hear it.

[Triple 7]

Dont knock em. They've held 60 on my truck just fine.

Yep, mine have seen 90-95 psi a ton of times. Only had to replace one so far!

[haloman]

Looks Good! I am really digging the valve cover choice.

[baprewitt]

Looks Good! I am really digging the valve cover choice.

It was very easy and cheap. I sand blasted it in the shop. then polised the raised ribs etc... then put vasoline on the parts you dont want paint to stick.

then primer and several coats of paint.

take a razor blade and remove areas where the vasoline was and clean wipe everything clean then apply several coats of clear coat.

Worked very nice. Just be gentle pulling cover in and out of engine bay

[parttimepuller]

Cant wait to see it pull

[97' CTD]

Good deal!
Brandon

[RickFox]

That is Awesome! I can't wait to do mine...

Rick

[nomercy]

man what a show off! looks good mr. prewitt just giving you a hard time Im glad to see some guys stepping it up so we can keep the dodges in the lead is all that matters

[dsl kicks gas]

the alt wont charge with out input from the tach. i got a external regulator from napa to make mine charge.

[baprewitt]

the alt wont charge with out input from the tach. i got a external regulator from napa to make mine charge.

yea im doing the same. no need to waste the time on the cam sensor when all you gotta do is install a $17 external voltage regulator

[dsl kicks gas]

and the stock tach only goes to 4k.......where did you get the regulator? i had one i used a while back on a tractor and now its not wantin to charge

[j-rod]

What else is lost when you don't relocate the CPS?

[Got Milk?]

What sticks are you running?

[dsl kicks gas]

well on my 12v i didnt use the crank sensor or the cam sensor the oil psi and tach dont work. the reason the oil psi dont work is because its a calculated figure, it uses engine rpm and AIT to give you a reading. and if the oil "sensor" reads below 10psi it drops the gauge to 0 and you get the check gauges light!!

[Rods]

WOW I'm shocked you had the baddest VP for years.. Finally gave up the ghost ???

[baprewitt]

WOW I'm shocked you had the baddest VP for years.. Finally gave up the ghost ???

Everyone else is spending more so i guess i have to as well. haha

[Electric_Cowboy]

I'm jealous... really considered a p-pump swap, but ended up just putting a SO back in after the last one went out. Looks bada$$!!!!

[baprewitt]

Ill post some more pics with the new intercooler and electric fans here as soon as i get em on!

[baprewitt]

http://photos-h.ak.fbcdn.net/photos-ak-snc1/v2626/113/51/501741169/n501741169_1476559_2258114.jpg

http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2626/113/51/501741169/n501741169_1476560_2276257.jpg

http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2626/113/51/501741169/n501741169_1476562_1325619.jpg

http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2612/159/86/586526519/n586526519_1592896_4675540.jpg

Here are some pics with the new Cool~Twist Intercooler, Haisley boots, flex-a-lite fans

Not to mention properly charging alternator!:)

[BigB82789]

Good god, how much backspacing is on those rims? I'll bet your front brakes never over heat??

[baprewitt]

Good god, how much backspacing is on those rims? I'll bet your front brakes never over heat??

they dont get too hot going from the trailer to the end of the track:st:

4inch aluminium wheel spacers.

[DEEZELRAM114]

they dont get too hot going from the trailer to the end of the track:st:

4inch aluminium wheel spacers.

man i was wondering the same thing. I have 2in spacers but havent put them in yet.:rules:

[dsl kicks gas]

glad you got the alt figured out.....looks good

[baprewitt]

http://photos-f.ll.facebook.com/photos-ll-snc1/v2676/159/86/586526519/n586526519_1643933_2414940.jpg


It Works!

[getblown5.9]

you have spacers all around or just up front? the back spacing on my wheels puts mine out about 3" from the fender...dunno if i wanna go wider tho.

wait til you hook it to a sled...it makes it all worth it.

http://www.mustangmods.com/ims/u/908/14100/280944.jpg

[JakeDiesel]

http://photos-f.ll.facebook.com/photos-ll-snc1/v2676/159/86/586526519/n586526519_1643933_2414940.jpg


It Works!

id say looks good man

[baprewitt]

you have spacers all around or just up front? the back spacing on my wheels puts mine out about 3" from the fender...dunno if i wanna go wider tho.

wait til you hook it to a sled...it makes it all worth it.

http://www.mustangmods.com/ims/u/908/14100/280944.jpg

I have the spacers just in front in an effort to get the front wheels out of the dirt the rear wheels will be trying to grab traction in.

P.S. Good lookin truck, looks like it really runs good

[baprewitt]

http://www.facebook.com/video/video.php?v=69705311169&ref=mf

[Triple 7]

http://www.facebook.com/video/video.php?v=69705311169&ref=mf

SWEET!!!

[97' CTD]

Awsome cant wait to hook with ya!
Brandon

[Sticky]

Here are some pics of my recently completed ppump conversion. looks good i think and sounds even better. Im real excited about it! except for the fact i didnt know the 01's needed the cam sensor so i didnt bother with it. now that its all back together i realize the alternator isnt charging. but ill fix it. Im just happy i got the new cam, turbo, pump lines injectors etc on

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346733_1868.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346734_2057.jpg
http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346736_2249.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346742_3434.jpg
http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v289/159/86/586526519/n586526519_622004_9398.jpg

looks very good dude..:rockwoot:

[Kman9090]

You can run spacers in the 2.6 class?

Also good looking truck, to bad you had to go and ppump it! LOL

[BigB82789]

http://www.facebook.com/video/video.php?v=69705311169&ref=mf

I don't think I've ever wanted to P pump my truck more :rockwoot::woohoo:

[97' CTD]

You can run spacers in the 2.6 class?

Also good looking truck, to bad you had to go and ppump it! LOL

He is 3.0"
Brandon

[Kman9090]

oh i thought TJ said he was running spacers.

[baprewitt]

I don't think I've ever wanted to P pump my truck more :rockwoot::woohoo:

they sure are fun:st:

[DEEZELRAM114]

http://www.facebook.com/video/video.php?v=69705311169&ref=mf

:bow::hump::rockwoot:

[nomercy]

looks good bryan im sure you will do really well with the new setup!

[baprewitt]

OK. the ATS arc flow intake does sit a little too high. Hood shuts fine but i went to check the oil in it the other day and the plastic t-handle end of the dipstick had been broken off. so the hood must get just close enough to pop that off. Relocation to come

[dsl kicks gas]

looks good..... your first hook gonna be in franklan?

[baprewitt]

yea i believe so

[BigB82789]

So how did it hook this year as compared to the VP?

[baprewitt]

it was a world of difference. RPM + fuel = heaven!

[red dodge2]

how many rpm were you seeing?

[baprewitt]

i would come off the line around 5300rpm then maintain around 4800rpm

[red dodge2]

did you do anything to your bottom end, or was it stock?

[777dbk]

Sweet

[SootKing]

hey is your transmission an auto? cuz ive been having problems with the shift patterns in mine...oh and whats the specs on an s400?

[JFlagg]

hey is your transmission an auto? cuz ive been having problems with the shift patterns in mine...oh and whats the specs on an s400?

s400's come in several dozen configurations... I know as small as 64mm up to 83mm. Might be some smaller and bigger, I'm no expert.

[red dodge2]

it was an s400sx. 3.0 with a 2.8 bushing.

[baprewitt]

i ran a 6spd

[kjpcummins]

I have a feeling your old truck will be running even harder next year.

[baprewitt]

and with someone elses money, thats the best part!

[kjpcummins]

When i first saw it around here at a few pulls i knew i had seen it before but couldnt place it till weston told me whos truck it was.

[kjpcummins]

what gear did you pull in when you had it.

[baprewitt]

2nd hi range

[JIT]

Where did you get your lines? And what/whos sticks were you running?

Josh

[BgBlDodge]

Got my lines from scheid for $560 shipped including spacer, longer bolts, gaskets, and clamps, .084 mild steel.

[baprewitt]

i got the pump (II 13mm set to 670cc) lines (scheid stainless .093) and injectors (II not sure on size) for 1200 bucks.. got it all used from a truck used for 3 months.

[baprewitt]

http://www.youtube.com/watch?v=hNJiEGhRZX8

[SootKing]

what exhaust manifold u running? the ats bigfoot t4 one? or a different one.

[baprewitt]

what exhaust manifold u running? the ats bigfoot t4 one? or a different one.

yes

[SootKing]

yes

oh alrite, who built ur charger?

[gen2cummins]

hey if ya dont mind my asking is is that a valvecover breather of some sort on the passenger side of your valvecover?

[baprewitt]

crank case ventilation. it has a hose running to exhaust and as exhaust gasses move past metal tube welded into downpipe it creates a vaccum and pulls out crank case pressure.. same as running 3 or 4 breathers on tope of valvecover

[getblown5.9]

What gears did you have in the truck to run 2nd hi range at that rpm?

i come off the line at 5k and run down the track at 4k, im a little scared to turn 4800 on a stock bottom end.

[baprewitt]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs189.snc1/6331_121262691519_586526519_2382189_3369124_n.jpg (got exctied comin off the line at hometown pull, really let er rip )ha ha

4:10s

[getblown5.9]

damn, i wouldnt try 6k on a stock bottom end. i hit 5k but thats with no load.

[CTD24V]

awesome truck

[WhiteNoise9924v]

Here are some pics of my recently completed ppump conversion. looks good i think and sounds even better. Im real excited about it! except for the fact i didnt know the 01's needed the cam sensor so i didnt bother with it. now that its all back together i realize the alternator isnt charging. but ill fix it. Im just happy i got the new cam, turbo, pump lines injectors etc on

http://photos-f.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346733_1868.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346734_2057.jpg
http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346736_2249.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v2372/113/51/501741169/n501741169_1346742_3434.jpg
http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v289/159/86/586526519/n586526519_622004_9398.jpg

LOOKS RELY NICE

[gen2cummins]

the alt wont charge with out input from the tach. i got a external regulator from napa to make mine charge.

where might i ask does this get wired in? mines not charging either and i'll just buy a 6k rpm tach