PDA

View Full Version : Getting ready to throw VP in the toilet!!!!!!!


jktcummins
04-27-2009, 08:58 PM
Planning on in the near future throwing this VP in the ****ter!!!!!

Just wondering if i am missing anything for the swap.


I am thinking about pulling the motor out and giving it a little TLC. I have a 06 head going to put on it with a ZZ intake.

So i am going to need for the swap???


Fuel lines with cr Nuts on them or Connecter tubes for the CR head?
Ppump, pump bracket,

Where can i find an adjustable pump gear???
New style front cover housing
front cover with whole for adjustable gear
Cam sensor adapter

Linkage for throttle

Not sure if i am going to run manual shutoff or a solinoid

Bracket for the ECM

going to have to rig something up for the oil feed and fuel feed to the pump.
Make FASS push 45psi or buy new unit



For the motor!!!!!!!!!

Get my haisly street puller cam reground at hamilton
What should i do about the rods and pistons??????
Coated bearing?????
Main studs????
Rod studs????
Girdle???

Whats it take to do way with the altenator, A/C compressor, and water pump???




What am i missing????????

SmokinCummins
04-27-2009, 09:22 PM
Um, planning on going from a street truck to a trailered truck?

jktcummins
04-27-2009, 09:25 PM
Well the DRAGON FART is already to smokey. And plus this is one reason i bought another tuck. The 02 will just be a play truck wont see long trips. Just playing. Drag racing a pulling

j-rod
04-27-2009, 09:29 PM
Injectors may need to be reworked. I have been told it is cheaper to have CR nuts put on the head side than to run custom tubes. Probably worth a look though.

Adj pump gears can be had at PDP and ED I think.

Rods
04-27-2009, 09:37 PM
Mine is more drivable with the Ppump than it was with the ADR or redline , and gets just as good MPG

I still love ya matt and just mayb u guys may hit something

Kman9090
04-27-2009, 09:46 PM
Stay with the VP!

jktcummins
04-27-2009, 09:50 PM
The blue P pumped truck????

taterbob01
04-27-2009, 10:18 PM
ill be throwing mine in the toilet within a few weeks!! p-pump kit gets shipped tomorrow!!:ylsuper:

jktcummins
04-27-2009, 10:21 PM
WHOS?????

getblown5.9
04-27-2009, 10:29 PM
look at belvin's truck. he has a 2002 24v auto. just about the same setup you are looking at. He was the guy that pulled 810hp on a really mild setup at Buda this year.


more info? whats the truck set up to do (dyno, race, pull)? charger size?

jktcummins
04-27-2009, 10:32 PM
Race and it has twins.

roachie
04-27-2009, 10:37 PM
Fuel lines with cr Nuts on them or Connecter tubes for the CR head?
Ppump, pump bracket,

The bracket is 2 piece

Where can i find an adjustable pump gear???
New style front cover housing
front cover with whole for adjustable gear
Cam sensor adapter

/\ All that can be had from haisly or schied. Jerrod Glover is selling covers and kits to put the hole in the front cover for the cam gear.

Linkage for throttle

Not sure if i am going to run manual shutoff or a solinoid I have the parts to do a manual shut off if you need them.

Bracket for the ECM Ill get a pic of mine or I could fab you one.

going to have to rig something up for the oil feed and fuel feed to the pump.
Make FASS push 45psi or buy new unit
You need a T-fitting for the oil feed to the pump, and the line


That should cover it.

jktcummins
04-27-2009, 10:40 PM
a pic would be nice

roachie
04-27-2009, 10:41 PM
Ill get you one when I pull the engine. Its hard to see.

CL2000
04-28-2009, 01:33 AM
Just got my truck going with p-pump and cr head you will have to do a zz intake or cut and weld the head to clear the pump. Get your lines from Schied.

shiftycapone
04-28-2009, 11:55 PM
look at belvin's truck. he has a 2002 24v auto. just about the same setup you are looking at. He was the guy that pulled 810hp on a really mild setup at Buda this year.

Yes more info and maybe a video on this truck if you got one

Scooter's Roofing
04-28-2009, 11:56 PM
I was here

shiftycapone
04-29-2009, 12:06 AM
I was here

"Here" as in you were at the dyno?

Scooter's Roofing
04-29-2009, 12:26 AM
"here" as in I've been telling him to P-pump that thing for WAY too long...

shiftycapone
04-29-2009, 12:29 AM
"here" as in I've been telling him to P-pump that thing for WAY too long...

Gotcha man , thinking I may be going that route this summer:Cheer:

CL2000
04-29-2009, 01:22 AM
Gotcha man , thinking I may be going that route this summer:Cheer:
Do it I love mine! How you been? We are having a dyno this weekend if youre bord

shiftycapone
05-04-2009, 05:04 PM
Do it I love mine! How you been? We are having a dyno this weekend if youre bord

Dude I have been good! Kinda forgot about this post. I saw cole (smokin93) last night at the pulls and he was telling me about the dyno, sounded like a good time! You know anywhere were I can get a 180 or 215 pump? Really thinking about converting this summer:evil

CL2000
05-05-2009, 12:05 AM
I may have a 18o pump for sale. Im going to buy a 215 If I can find one cheap enough.I have a 160 on it rite now Im going to see how far I can get I have 20 deg set on the pump and may add even more because it spools so well rite now.

explosives87
05-05-2009, 12:56 AM
Shiftycapone give Allen Diesel energy a call in Yuba City,CA. They might have one for sale. :rockwoot:

shiftycapone
05-05-2009, 11:58 PM
Shiftycapone give Allen Diesel energy a call in Yuba City,CA. They might have one for sale. :rockwoot:

Will do man thanks!

HIGH TECH RAM
05-06-2009, 10:25 PM
Just to throw it out there... Last weekend at a local pull VP trucks did very well in 2.6 One of them took 2nd. It was the red dually on 19.5's(Nasty Habit)
YouTube - Wooster May 2, 2009 (http://www.youtube.com/watch?v=luQRNFV2e6I&feature=channel_page)
His other vp truck is runnin 11.01 fuel only

CL2000
05-06-2009, 11:51 PM
Just to throw it out there... Last weekend at a local pull VP trucks did very well in 2.6 One of them took 2nd. It was the red dually on 19.5's(Nasty Habit)
YouTube - Wooster May 2, 2009 (http://www.youtube.com/watch?v=luQRNFV2e6I&feature=channel_page)
His other vp truck is runnin 11.01 fuel only


I got sick of replacing mine is why I went to a p pump. I still have a love for vps

ben99
05-17-2009, 11:35 AM
Stay with the VP!


Because you have pulled so well with yours!!!:umno:
haha