PDA

View Full Version : how do i start my P-pump project?


MurdaManDiesels
06-29-2009, 08:53 PM
can anyone give me a list of parts that i will need to p-pump my 2000 24valve? and what do i do about timing and all the electronics?

Pinion Twister
06-29-2009, 10:19 PM
I am in the middle of a swap on my 99'.
Don't have a list of parts you need, but if you read the threads in this section you will find your list and any other imfo you might need.
Good luck and take your time.
Keith

georgboy
06-29-2009, 10:21 PM
Let's get to readin William LOL

red dodge2
06-29-2009, 11:17 PM
timing case,lines,pump gear,intake horn spacer, cam relocation sensor, timing cover, pump brackets, throttle cable, TPS off a wrecked 12v, and a 13mm P7100 pump!

Warpig
06-30-2009, 12:59 AM
timing case,lines,pump gear,intake horn spacer, cam relocation sensor, timing cover, pump brackets, throttle cable, TPS off a wrecked 12v, and a 13mm P7100 pump!


Hey, you copied my build :hehe:

georgboy
06-30-2009, 01:46 AM
Sounds like we have a plan. Who has made over 650 hp with single charger on a vp truck. Sounds like it is a huge challenge to do this?

red dodge2
06-30-2009, 08:22 AM
yes, i heard from a couple a people it is hard to do. unless you put nitrous, but i wouldnt do that. fuel only it can be hard. im roughly 150hp away. hopefully whenever i p-pump the truck i can jump right up to that. and then some!

burtonboarder
06-30-2009, 05:18 PM
haha you start it like i started mine. you get bored one day and just start tearin it apart.

MurdaManDiesels
07-07-2009, 09:36 PM
what kind of price are we talkin to do the full p-pump conversion if i do it my self?

FosterW
07-07-2009, 09:48 PM
Upwards of 2K.

BgBlDodge
07-07-2009, 10:26 PM
Buddy of mine did it for free after he parted his truck out and parted out the engine he bought to steal parts from.

chevota84
07-09-2009, 11:26 AM
Do you guys have a constant c.e.l. after doing the conversion?

Warpig
07-09-2009, 04:06 PM
Do you guys have a constant c.e.l. after doing the conversion?

Yes, no communication between ecm and injection pump :Cheer:

MurdaManDiesels
07-09-2009, 05:52 PM
ive got my 95 12 valve that i can use as the donor truck. what else would i need to complete the conversion(thats not on the donor truck)? the donor truck has 394,000 miles on it, would you rebuild the pump?

BgBlDodge
07-09-2009, 10:08 PM
New injector lines, intake spacer, cam sensor relocation bracket.

taterbob01
07-11-2009, 12:50 PM
good supply of rags.