Race Governor Spring

[HOSE_B]

Ordered Race Governor Spring From Ddp. Had Pump Shop Try To Install Said They Couldn't Make Them Work. Have A 913 Pump Maxed Out Help

[ride42]

Um what exactly is your problem? Are you talking about a 5k GSK kit or what?

[HOSE_B]

Yes 5k Springs Said They Would Not Set Up Wright

[ride42]

Did they have all shims out? As far as I know it should be the same as any standard GSK kit. All that should be required is use of the correct springs with the correct seat and then the correct amount of hard clicks after the initial soft click. The slot in the nuts should be the same on both studs. After that the idle should be set.

Drive it around and see what it is like then make the adjustments.

What part of Utah?

[HOSE_B]

Live In West Jordan Will Try And Put The Spring In My Self Be For I Put The Pump Back On The Truck Thanks

[ride42]

Was there only one spring or did you recieve a kit?

[Rods]

So u say a pump shop cant set them , even on a stand???

[HOSE_B]

there was 4 springs in the kit and the pump shop could not set them up on the stand sumthing about rack binding

[Rods]

Yea I had that prob at 6 clicks it would bind had to back them off to 5 but Idle was to wild either 1500 or nothing ,I put the 4s back in for now

[HOSE_B]

i had them shim the 4k springs to 4500 i wil try that for now

[GOLDDUSTERS5703]

Gsk Headaches W/ Benched Pump - Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/showthread.php?t=63535)