PDA

View Full Version : Need help with fuel system


Redmax
09-22-2009, 09:03 PM
Im putting a airdog 150 fuel pump on and the instructions tell me to hook it into the existing fuel lines couldnt i run a half inch line rite to the cp3 and eliminate the stock fuel filter makes sense to me but not real familiar with these fuel systems?

JD4440
09-23-2009, 10:40 PM
Is your primary goal to eliminate the filter or run a new fuel line ? I bypassed my filter right at the head so all that trouble in un-neccassary.

Redmax
09-24-2009, 02:49 PM
2 eliminate the filter wasnt sure if the bigger line would help that much or not

Turbo Performance
09-24-2009, 02:55 PM
2 eliminate the filter wasnt sure if the bigger line would help that much or not

I would just eliminate the filter. A bigger line isn't going to do much, if any for you. $.02

Redmax
09-24-2009, 03:56 PM
alrite just what i needed to know

JD4440
09-24-2009, 09:28 PM
Line is already 1/2" Just loop it atthe filter head.

JustinD
09-24-2009, 09:32 PM
Why eliminate the filter? Is it that restrictive?

Turbo Performance
09-25-2009, 11:34 AM
Why eliminate the filter? Is it that restrictive?

Not sure that it's that restrictive but if you have an airdog doing the filtration then you can eliminate the stock fuel filter to stop any problems. I've heard of filter heads cracking, leaking air etc. One less thing to worry about.

JustinD
09-25-2009, 12:01 PM
Oh I see.

JD4440
09-25-2009, 05:56 PM
It seemed to make my p0087 code less common.

Turbo Performance
09-25-2009, 06:09 PM
It seemed to make my p0087 code less common.

So that tells me that it is restrictive to the Air Dog. Good info.

JD4440
09-25-2009, 06:28 PM
I run TTS duals with a CAT filter but same result I'd say.