FASS on 1st gen?

[stillsmokin]

I've been looking into a fass or something similar for my first gen. I know it sounds crazy. I can pull the fuel pressure down to 5 psi form the 18 psi no load pressure the piston lift pump upgrade gives. Figure I'm in retarded timing with the pressure that low. I heard KTA was running such a setup. I'm going to twins and EDMs in the near future so I'll need more pump to keep up.

[Dazed&Confused]

KTA is running a Aeromotive pump I believe that he setup for his system. You would have to talk to Brian about his setup.

Andy

[smokin92]

You can do it. I seen stomp at may madness last year with a fass system

[Diesel-Dan]

It can be done from what i hear. BUT i also hear that the stock pick up in the tank is WAY small. This would need to be addressed. As far as anything else....i would just treat it like our FASS-150/95-1008 kits and install a PS-1020 spring that will set it up with about 19-21 PSI. You would have to finagle something’s......like wiring and pump hook up (Although our DIPF-1001 fitting might fit just fine....never tried with a VE pump)

[stillsmokin]

I modified the heck out of the tank unit already, it's full 3/8" line all the way to the lift pump. It was only 1/4" down into the tank stock.

[Diesel-Dan]

I modified the heck out of the tank unit already, it's full 3/8" line all the way to the lift pump. It was only 1/4" down into the tank stock.


You should be fine in that reguard then......