PDA

View Full Version : Truck Wont Go Into Gear


blackbetty62
12-05-2009, 08:33 AM
my truck is almost impossible to get into reverse and 1stand is also hard to get into 2nd when sitting still. Sometimes it is hard to get out of gear while moving but no trouble getting into the next. I adjusted the rod on the back of the clutch pedal had no effect. Does this sound like a problem with the clutch or transmission? I have a SBC 3600DD

powerstroke74
12-05-2009, 09:00 AM
sounds like the hydrolics maybe air it should get better in time

onetun
12-05-2009, 11:40 AM
Sounds like the clutch is not releasing all the way. You should be able to extend the master giving you some more throw. You want to try and have the slave push the fork closer to the pressure plate. You may end up adjusting the rod to a point to where the fork will hit the plate, then back it off.
Make sure the jam nut is not hitting the nuetral saftey switch when you extend the rod.