PDA

View Full Version : Need some help please


ArmySoldier
03-03-2010, 06:34 AM
This morning I went to pass someone and I felt a hard jerk and the truck lost power and woulndn't go into 5th gear and the CEL came on. After I got home I checked for codes and this is what I got.

P0700 Tran ctrl sys error
P0735 Gear five ratio error

I searched for the codes and found a list of them but what should I do, just clear them and see if they come back or is there something major that is now broken? Thanks for any info

JD4440
03-13-2010, 11:26 PM
You can clear them and see but you've most likely limped the trans since it's 5th gear.

charlie
03-14-2010, 12:02 AM
Get A Hold Of My Diesel Addiction He Can Fix It Or Tune It If Its A Dmax

Durydeek_88
03-14-2010, 12:04 AM
X2 on the limp

Iron-Hyde
03-14-2010, 12:55 PM
i would just clear it and go. start saving for a tranny build though. and either back down the power or don't drive it so hard or both.

BW Motosports
04-16-2010, 12:53 PM
You most liely sent the tranny into limp mod. x2 on being ready for a tranny rebuild or back down the power. best of luck.

jordanjames81
04-16-2010, 01:02 PM
x2 on limp mode, back the tranny down in save it while you can. Start putting money up to build it buy one already built.