PDA

View Full Version : Garrett charger oil feed???

Willy91
03-23-2010, 12:59 PM
Hello I have a Garrett T18A that I am going to be running as the primary in my compound setup, and looking for the oil feed for it. I found some feeds that fit Garrett T3, T4, T04E, T60, T61 / T67 25G Turbos, that look close to what I need. wondering if they are the same as my T18A. Thanks
Willy91
03-24-2010, 07:51 PM
Hello I have a Garrett T18A that I am going to be running as the primary in my compound setup, and looking for the oil feed for it. I found some feeds that fit Garrett T3, T4, T04E, T60, T61 / T67 25G Turbos, that look close to what I need. wondering if they are the same as my T18A. Thanks

anyone?
crewgirl
03-24-2010, 08:52 PM
Oil Return Flange with integrated -10 Flare for GT15 Through GT35R : atpturbo.com (http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-FLA-019&Category_Code=BCS)
Willy91
03-24-2010, 09:21 PM
Oil Return Flange with integrated -10 Flare for GT15 Through GT35R : atpturbo.com (http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-FLA-019&Category_Code=BCS)

so the fittings for the GT series are the same as this turbo? Thanks, thats what I needed to know.
crewgirl
03-24-2010, 09:25 PM
I'm assuming yes, but if you look on the garrett website, there is a dealer in Houston, TX that's been helpful in answering questions for me.
Willy91
03-31-2010, 03:21 PM
Ok so I figured out my oil lines finally, now the new problem. I had a 5" v-band flange off of a c-15 cat I was going to use for my exhaust but it's to big, by a little bit. Anyone know what exhaust flange these take? Thanks.
coon smile
03-31-2010, 03:32 PM
http://www.columbusdieselsupply.com/tp9.php

Call them.
crewgirl
03-31-2010, 04:21 PM
On the Garrett site you can get all the info you need about your turbo.
coon smile
04-01-2010, 09:55 AM
http://www.columbusdieselsupply.com/tp9.php

Call them.

BJ,

If you click the link and scroll down, you will see a 5" and 6" exhaust outlet for the T18A, and right below that they have a (2) 6" v-bands for the outlet. I am sure they have a 5" v-band for the 5" outlet (if that is what your turbo has) if you call them, although it does not appear to be listed on their website. They are also close, and shipping would most likely be next day or second day ground.

Kyle
Willy91
04-01-2010, 11:51 AM
BJ,

If you click the link and scroll down, you will see a 5" and 6" exhaust outlet for the T18A, and right below that they have a (2) 6" v-bands for the outlet. I am sure they have a 5" v-band for the 5" outlet (if that is what your turbo has) if you call them, although it does not appear to be listed on their website. They are also close, and shipping would most likely be next day or second day ground.

Kyle

ok yeah I'll give them a call, thanks Kyle