Sourcing Hobbs switch
I've been trying to find an adjustable Hobbs switch (boost activated). They are harder to find than I though. Most of them are out of stock. I'd like it to be around 15-20 psi range. I'm sure there are more out there, just can't seem to locate it.
|
I use a nason brand part#cj-2a3-85g/wl. The range is 20 to 120 psi. Very clean on and off function.
|
Ive got piles on the shelf at work. They are used for oil pressure switch on many thermo king units. I used them for water injection before work great.
|
My problem is finding them that are normally open, closing around 20 psi.
|
Crackerman.. help Bret out?
|
I think I got mine off ebay. I will double check and post the part number when I get to the shop.
|
When do you need one by? I have a few.
|
Ill get a brand name off mine tmrw when i get home.. Mines 0-150 psi iirc
|
Of course mine could be some CHINA junk I guess we will find out tomorrow when I get the P/N
|
Thanks guys. I checked out the one Ponci posted. It doesn't have much info, but looks like what I need. I don't have to get it super quick. cracker, are yours adjustable?
|
Yes they are. He can ship to you or we can carry to finals... Or Sunday afternoon I will be driving to Houston we can meet up on45 somewhere..
|
Ok, whatever is easiest. I got drugs on the way for my truck, wanna make sure it doesn't kick in too soon.
|
Yeah, riv can carry one down. You will need to hook it up to air to set to the psi you need. It is set pretty low now. Like 2 psi. But goes way higher.
|
That's awesome! Brandon, sending you my number , now.
|
im going to be putting mine on the laughing gas after the finals and i was also looking at the hobbs switch my question is what pressure are yall setting the switch at and how much would you sell me one for crackerman?
|
I'm thinking around 20 psi, but I'll just have to play with it to see.
|
would you put the switch in the intake horn next to the nitrous line?
|
haven't decided yet. I'm going to tube it in, and mount on the firewall somewhere. I've heard some don't like the vibration & heat. I'm putting nitrous jet in the intake horn though.
|
do you think if i just tee'd into my boost gauge line it would work that way i dont have to take up another spot on the intake horn and what your talking about doing is what i was planning on too
|
Quote:
That should work fine.. |
All times are GMT -5. The time now is 08:42 PM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com