2014 Rules
1 Attachment(s)
Here are the updated rules for the 2014 season.
|
:clap: :clap: :clap: :clap:
|
Now where's the schedule!! :D
|
Just to verify a 2.5 truck needs to run a S300 based charger. No s400 based 2.5 chargers are aloud?
|
Quote:
|
What about a Garret or holset chargers?
|
Hx40 and gt30 I believe
phone |
Quote:
•Turbocharger: The turbochargers limited to a single small frame (s300, gt30, hx 40 or smaller) 2.5 inch inducer bore turbo. The bore will be checked with a 2.550 inch plug. No MWE groove larger than .200 inch is permitted. No bushing of the inducer is permitted. 6.4 liter Power stroke engines may utilize the factory twin turbo configuration in OEM stock form only, no modifications allowed. Aftermarket exhaust manifolds are permitted as long as the exhaust flange is no larger than T4 (3.500 x 2.750).The driver will be responsible for making the compressor wheel and bore accessible for Tech Officials to measure bore and inspect the compressor wheel. |
Quote:
|
Needs to say no clipped wheels if you want true 2.5
phone |
Quote:
|
Quote:
If it said no clipped wheels then yes phone |
To reduce any further confusion, the last sentance will read as follows;
The driver will be responsible for making the compressor bore accessible for the Tech Officials to measure the bore. |
Quote:
|
Quote:
Quote:
|
Quote:
Not a big fan of "small frame" wording...that's all kinds of things to different people.....and just leads to jamming S400 guts in a S300 turbo....more expensive custom cheater turbos. |
Quote:
phone |
Quote:
phone |
Clam Digger, Any interest in coming out our way to some pulls this season?? You are from NY, correct?
|
Time to spend money!
|
All times are GMT -5. The time now is 01:37 AM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com