Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   03-07 3rd Gen. (http://www.competitiondiesel.com/forums/forumdisplay.php?f=85)
-   -   Drive shaft question (http://www.competitiondiesel.com/forums/showthread.php?t=200442)

dooishman 06-14-2018 10:21 AM

Drive shaft question
 
I bought a truck recently it looks to be lifted 3-4 inches the drive shaft is bent and is causing vibrations and cause the transfer case to mess up so i bought a used drive shaft from im guessing a stock truck when i go to lengthen the drive shaft should it be a tight fit from transfer case to axle or should there be like an inch of space? Hopefully u guys can understand I'm really bad at writing things

dooishman 06-14-2018 11:29 AM

There's 3inches from the ends of both driveshaft and axle where they would meet. And that's with drive shaft all the way in the transfer case


All times are GMT -5. The time now is 01:18 AM.

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2018, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com