Competition Diesel.Com - Bringing The BEST Together - NV4500 reverse idler shaft and bearings

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)

- Wanted To Buy (http://www.competitiondiesel.com/forums/forumdisplay.php?f=51)

- - NV4500 reverse idler shaft and bearings (http://www.competitiondiesel.com/forums/showthread.php?t=199335)

stillsmokin

02-13-2018 11:04 AM

NV4500 reverse idler shaft and bearings

I need a good used "wide" reverse idler shaft and bearings for a NV4500 5 speed, they were used from 92-around 95 by GM and dodge.

Mark Nixon

02-13-2018 11:47 AM

This was used up to '97 on Dodge, I believe.
I don't have anything, of course.

Mark.

stillsmokin

02-13-2018 12:33 PM

Quote:

Originally Posted by Mark Nixon (Post 2656143)

This was used up to '97 on Dodge, I believe.
I don't have anything, of course.

Mark.

I'm putting a Chevy 4500 back together that you had at one point. You might remember it, parts in a bucket of rain water and the input was snapped off. The previous owner was really nice to it!

Mark Nixon

02-13-2018 12:36 PM

I vaguely recall it, I sold it cheap enough. :D

Mark.

95cummins5.9

02-13-2018 02:15 PM

Call 2 and 92 truck and van in Silvis Illinois. They will ship it. 3097929211

geared2death

02-16-2018 08:46 AM

nv4500 early rev idler pin and bearings

Quote:

Originally Posted by stillsmokin (Post 2656133)

I need a good used "wide" reverse idler shaft and bearings for a NV4500 5 speed, they were used from 92-around 95 by GM and dodge.

i have 2 new brgs and a good pin. if you still need them, give me a call at 612-309-3999..........612-309-3999

stillsmokin

02-28-2018 01:56 PM

Quote:

Originally Posted by geared2death (Post 2656608)

i have 2 new brgs and a good pin. if you still need them, give me a call at 612-309-3999..........612-309-3999

I did find what I needed and am waiting for it to ship, if it doesn't work out I'll give you a call.

All times are GMT -5. The time now is 03:18 AM.