S366 Borg Warner Box Turbo vs. Bullseye
Has anyone run both the standard out of the box Borg Warner S366 and the Bullseye S366? Is the Bullseye worth the extra money?
If you haven't run both, then share you experiences on the one that you have run. I'm interested in spool characteristics since I would be ditching the stock VGT that spools very fast. |
Quote:
|
the out of the box charger comes with a .91 divided t4 or a .88 non divided t4.
depending on what you order from bullseye, you can get a t3 housing and race cover. to say they are the same turbo is incorrect, they START as the same turbo, would be more correct. |
Quote:
Quote:
I would be looking at a divided T4 housing. I'm undecided on the size I need. I guess that's where the customization comes in with Bullseye. They make a race cover for the S300 series? Anything more you can add about the Bullseye features? |
Bulleyes has race covers polish housings they do their own tweaks to them they are not stock. Basically the same but not a stock charger.
Theres a couple of guys on here that have ran a Bullseye 66. |
Quote:
I'm not sayin it's not true, but would like to see a flow chart (vs.) or any other ways to prove all the claims that could just be hype:poke: |
Quote:
|
After a little more digging on online Bullseye vendors, I found that Bullseye offers more options for the turbine side. It seems that the compressor wheel is the same, but everything else has more options. You can get it with a 83mm wheel that I can't find in Borg Warner's catalog. You can also get it with a .90, 1.00, 1.10, or 1.25 A/R divided housings that I can't find as an option from Borg Warner either.
Does anyone have a picture of the S300 race cover? |
Quote:
As far as a s366 I don't think much is changed there but there is alot if other custom things once you step outside the S366. |
Quote:
|
Quote:
Below is the vendor with this turbo I was referring to. He also has the S366XL for sale as well. The specs seem to match up with the S366 as best I can tell. I could be wrong, but let me know what you think. At the end of the day, I will probably buy it from Black's Diesel if Bullseye turns out to be worth it. http://cgi.ebay.com/ebaymotors/Borg-...item518fa5d3b6 |
Hard to say on those two turbos. He just uses a generic picture.
If nothing else my info can go as an fyi for you. The numbers just seem close and on that auction the S400 (S366XL) based charger is more expensive than the S300 (s366) based charger? I would only use bullseye if you need something with a custom housing, and do your homework to make sure you can't buy the same turbo off the shelf for less money. My $.02. |
I don't really like posting links for stuff like this. But this is really unbeatable.
http://www.diesel-plus.com/dd_turbo.cfm?npid=9784 |
Quote:
That's because it a S400 based charger. You can get a BW366 in that trim which turnsout to be = to an S400 with 83 turbine and T4 housing. |
Quote:
|
Quote:
|
i run bullseye chargers and never have had a problem i currently run the 66/73/.91 and its a awesome spoolin turbo
|
Quote:
like this? http://i662.photobucket.com/albums/u...e/IMG00026.jpg |
Quote:
|
Quote:
|
All times are GMT -5. The time now is 10:07 PM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com