Parting out 02 Dodge 3500 And an 07.5 PLUS Garage Cleanout
First truck is an 07.5 Cab and Chassis
Engine is not available or anything pertaining to. Full g56 swap interior and all- 2500 with your core trans Manual 271 transfer case- 700 Rear end- 1000 Front axle- 600 Full set of third gen 17 inch Dually wheels and tires- 450 no bed no bumpers, can sell cab its in decent shape has a salvage title though. Next is an 02 Dodge 3500 Everything that has to do with the 6 speed that was in it is gone and not available nor are the seats. Complete lift out 24 Valve Cummins HO ( high output ) Engine, comes complete with harness and ecm, this engine runs flawlessly absolutely no blowby at all, it is not a 53 block. Truck shows 326k Engine doesn't appear to have that mileage, on it, it is not covered in oil leaks nor does it have blow by. Truck was completely stock. Asking $2,500 Dual rear wheel Dana 80 DRW 3.55 gears, this is a rare disc brake rear end. Asking $1100 Front axle 3.55 gears, this is the non CAD axle. Asking 750 Intercooler $150 Flat bed SOLD Wheels and tires SOLD Radiator SOLD ALSO have 1 complete 99 Engine that can be parted out has a cracked block but has ARP 425 studs and an o-ringed head, 7x12 injectors, engine ran flawlessly. Will sell as a complete long block if wanted, has a good hx35 turbo. Also parting out a 01 long block, good crank, 5 good rods, block is trash. This engine also had a good hx35 on it If you're needing odds and ends let me know, also have a garage full of third gen parts mostly. Let me know if you need odd stuff I more than likely have it. |
From the 07.5, are interior parts available? I am looking for a tan set of sun visors. As well as a radio antenna from the base to the radio, including the coax cord and grommets.
|
Quote:
6 speed swap SOLD |
Quote:
Can you send me pics of the visors? (585)797-5985 Sent from my iPhone using Tapatalk |
They weren’t in good shape.
Bump! |
Lift out complete 24 valve sold
|
Would you part out the rear end on the 02? Mine is 4.10 and I just need the parts to convert to disc. Be expensive to ship the entire rear to NC
|
What do you want for the hx35s?
|
Quote:
Hx35 both are gone Crank and rods from 01 are gone The entire 02 truck is now gone and sold Will add I now have a 48re with 125k on it was told it shifted and didn’t slip has a billet cover single disk converter asking 950 for it also have a 273d electronic shift transfer case with 125k asking 700 on it. Also have a core 47re asking 450 no converter |
How much for the 99 engine? Where are you from?
|
Quote:
|
First truck is an 07.5 Cab and Chassis
Engine is not available or anything pertaining to. Full g56 swap interior and all SOLD Manual 271 transfer case SOLD Rear end- SOLD Front axle- SOLD Full set of third gen 17 inch Dually wheels and tires- SOLD cab its in decent shape has a salvage title $500 02 Dodge 3500 COMPLETELY GONE AND SOLD ALSO have 1 complete 99 Engine that can be parted out has a cracked block but has ARP 425 studs and an o-ringed head, 7x12 injectors, engine ran flawlessly. Will sell as a complete long block if wanted- turbo and injectors are gone. Also parting out a 01 long block only have head, valve train, timing case, cover, pan and valve cover left If you're needing odds and ends let me know, also have a garage full of third gen parts mostly. Let me know if you need odd stuff I more than likely have it. UPDATED LIST |
First truck is an 07.5 Cab and Chassis
Engine is not available or anything pertaining to. Full g56 swap interior and all SOLD Manual 271 transfer case SOLD Rear end- SOLD Front axle- SOLD Full set of third gen 17 inch Dually wheels and tires- SOLD cab its in decent shape has a salvage title $500 02 Dodge 3500 COMPLETELY GONE AND SOLD ALSO have 1 complete 99 Engine that can be parted out has a cracked block but has ARP 425 studs and an o-ringed head, 7x12 injectors, engine ran flawlessly. - turbo and injectors are gone. injectors and o ringed head are gone. Also parting out a 01 long block only have head, valve train, timing case, cover, pan and valve cover left If you're needing odds and ends let me know, also have a garage full of third gen parts mostly. Let me know if you need odd stuff I more than likely have it. UPDATED LIST |
All times are GMT -5. The time now is 01:54 AM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com