Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   Wanted To Buy (http://www.competitiondiesel.com/forums/forumdisplay.php?f=51)
-   -   2wd Pro street truck (http://www.competitiondiesel.com/forums/showthread.php?t=197380)

Onefastcr 08-13-2017 01:23 AM

2wd Pro street truck
 
Have a customer looking for a roller it's close to completed or something it has jump on the Chassis work. 4 linked 3rd or 4th gen. Pm me what you have or any leads to one.

Jeffrey Weeks 09-05-2017 04:19 PM

I seen a 2nd gen 2wd with cage, rear, caltracs, slicks and all in Florida on Craigslist, I believe in Jacksonville. For 5,000$. Said it went high 9's straight as an arrow.


Sent from my iPhone using Tapatalk

jasonc 09-05-2017 05:08 PM

Quote:

Originally Posted by Jeffrey Weeks (Post 2634392)
I seen a 2nd gen 2wd with cage, rear, caltracs, slicks and all in Florida on Craigslist, I believe in Jacksonville. For 5,000$. Said it went high 9's straight as an arrow.


Sent from my iPhone using Tapatalk

If it's white it's my old truck, would 60ft 1.48 and lift the left front tire 4"s. Never technically ran a 9 cause the local track was 8th mile but ran 6.50's at best.

Jeffrey Weeks 09-05-2017 05:10 PM

Quote:

Originally Posted by jasonc (Post 2634397)
If it's white it's my old truck, would 60ft 1.48 and lift the left front tire 4"s. Never technically ran a 9 cause the local track was 8th mile but ran 6.50's at best.



Yep that's it. I think it was posted in Jacksonville.


Sent from my iPhone using Tapatalk

jasonc 09-05-2017 05:13 PM

It's located in Middleburg, sold it to a buddy as a roller and he never did anything with it.

Jeffrey Weeks 09-05-2017 06:13 PM

Quote:

Originally Posted by jasonc (Post 2634399)
It's located in Middleburg, sold it to a buddy as a roller and he never did anything with it.



Nice, who set it up to hook? Custom work?


Sent from my iPhone using Tapatalk

jasonc 09-05-2017 06:18 PM

A chit load of trial and effort by me, the 60ft was no problem with the truck, it's when I tried to start putting some decent power to it down track. Would only hold so much after the conv locked down track. Bought a pro street 44 roller and swapped my engine/trans. The little truck runs 10.50's without breaking a sweat.

thatguy69 09-05-2017 06:24 PM

Theres a nice second gen roller on here I just saw yesterday for 6500 I think

Sent from my SM-N910V using Tapatalk

jasonc 09-05-2017 06:27 PM

It's Vaoutlaw that has it listed for 7500, straight up seller, that's who I bought my 44 roller from.

Signature600 09-05-2017 06:52 PM

I have a 97 1500 2wd shortbed...4 link with a AAM 11.5 narrowed, caged...have spool, 3.42 gears, 3 sets of slicks, front rubber and some other stuff, but needs all put together. Lost time for it...if it sounds interesting, pm me...

http://www.competitiondiesel.com/for...pictureid=3489

Chris

Bodacious 09-06-2017 06:12 AM

Quote:

Originally Posted by Signature600 (Post 2634419)
I have a 97 1500 2wd shortbed...4 link with a AAM 11.5 narrowed, caged...have spool, 3.42 gears, 3 sets of slicks, front rubber and some other stuff, but needs all put together. Lost time for it...if it sounds interesting, pm me...

http://www.competitiondiesel.com/for...pictureid=3489

Chris

I like that stance right there.

Signature600 09-06-2017 08:24 AM

Needs some springs in the back yet, but it's lowered all the way around.

Chris

Onefastcr 01-28-2018 10:09 PM

Bump still looking.


All times are GMT -5. The time now is 08:31 AM.

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2018, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com