68RFE lockup teaser
 

we're calling it ProLoc... it's nice to be able to hear RPM change on the 1-4 shifts for a change!

http://www.youtube.com/watch?v=3TPVMa0CCyo&feature=plcp

Congrats man and on a side note I'm in love with your truck.

I'm assuming this will be a 2007.5-2009 product, and the 2010+ trucks without the TCM will not be supported??

Chris

Lovin' the mini wastegate stack in the cowl! LOL

Me too :cheer:

Only tested so far in 07.5-09 type valvebodies but there's no reason it shouldn't work in 2010+

The hole used to be round, it's "self clearanced" after a few passes to more of a melted oval shape :blahblah1:

Will this void the 1 and 2 yr warranty when it's released?

As far as I know, the boss wants to deny warranty to anyone with one of these if/when we release it. That may however be scaled back to certain things not being warrantied as a result of this... at least until we overcome whatever's going to explode! So far so good on that aspect, he wanted me to yank the trans after this vid and before Scheids but I'm sort of superstitious and not willing to fix what isn't broken so if I smash it up there, then i'll put it on the bench LOL

I can see this being a nice advantage to drag racers. I sled pull with mine and I can lock up 4th under WOT. So, I generally let it shift to third which it does within 25 ft of starting and then shift it to 4th and the TC locks. I have tried it with 2-3-4 but I can't shift it that fast and I'm past 25ft by the time I do.

How does this one work...in general?

How it works is still secret squirrel... just know that it works :)

truck sounds good ryan, love the wastegate flame around the 2:20 mark

Looking good Ryan,

On a side note, my truck runs great with your tuning.

Patrick

Good deal man! So there's hope for the 68RFE after all ya?

nice!

So this is a mechanical part? In that case it should work from what I understand of the trannys....mechanically the same, different connectors and different brains I think.

Thanks!
Chris

It's a modification done to the valvebodies to make it do what it's told :)

When this is released with the valvebody be sold as a single part or part of a kit?

That's ultimately up to the boss to decide, it's a lot more involved that just swapping a valve body, initial thoughts were to only do it to trans in house that we could function check prior to sending out the door but... we'll see.

a little device that pushes on the switching valve?

its magic

Pfm baby!