Which shock ??
 

I have an 06 4x4 QCSB and want to build for street and strip.

Going to add caltracs and remove a leaf.

From my research I am seeing QA1s and bilstein 5100s

What about these king 2.0 shocks ?

I would like to lower the rear to level the truck as well. Is there a drop shackle available ?

1994-2013 KING 2.0 IFP F/R SET - SHOCKS - COMPONENTS - 2003-13 2500 / 2003-12 3500 - DODGE RAM - PRODUCTS

Anyone tried these to drop the rear ?

2003-2013 Dodge Ram MC 2500 3500 2WD 4WD 2in Drop Lowering Shackles Leveling Kit | eBay

I'd be buying another set of afco coil overs if I were spending 1k already..

If you're going cheap like the Bilstein route, might as well go with Rancho 9000's that are adjustable. For street / strip I'd go Rancho if not spending the coin on QA1s.

Yes I run those shackles, I don't think they are 2 inch even though they say, more like 1.5.

I'm going to try those shackles. That hadn't crossed my mind to look for yet.

Can you post the part # I need ? I am having a hard time finding it.

I would like the QA1 part number as well so I can compare ,if anyone can help.

I want front and back shocks

Thanks

I couldn't tell ya the part numbers for a factory height truck. If you pm me I can get you in touch with a good source for afco parts.

Someone on Instagram was putting a set of afco coil over shocks in their 3rd gen and they used P/N 3850 double adjustable or 3855 single. Supposedly those fit in the factory spring bucket with shock tower delete plates and it will lower the truck a little.

Those King 2.0s are tuned to be soft, way too soft for the strip. You want something with more control.