Refined list of 6.7 parts.
2010 6.7 longblock, moderately seared, head is not cracked, injectors appear to have survived, turbo, fan hub and CP3 didn't, oil pan is questionable, $2000.
2008 6.7 shortblock, was burnt, bores need attention, no oil cooler, timing case, block plate, or oil pan, $1300. 2008 6.7 BARE block, standard bore and needs bored, $850. 2008 long block, spun rod on number 1, no oil pan, rockers, turbo, injectors, lines, rail or valve cover pieces, crank WILL grind .010-.010, $1600. 6.7 CP3, from a runner, $320 SHIPPED. Complete 6.7 rail and lines, with RPS, $200 SHIPPED. Complete 2007 Valve cover set-up (have a couple), from gasket up, $150 SHIPPED. 2009 6.7 Injectors, good runners when removed with 85,000 miles on them, $600. 6.7 transfer tubes, have probably 5 or 6 sets, $85 a set, OR take all of them for $75 a set SHIPPED. ALSO HAVE NUMEROUS 5.9 COMMONRAIL CORES AND PARTS! Reply, PM or Call 402-780-5127. |
Bumperup.
Mark. |
I'll *bdh* once more.
Mark. |
The horse got up and ran away!
Mark. |
U got ne good g56 cases
|
Nope.
Mark. |
Just picked up 2 very nice standard bore blocks that should run at standard.
1 has very, very minor scuffs on number 6, you can see it, but not feel it. Both I feel would be very good to run at standard. $900 per block. I also have a couple of more long blocks to bust down. Mark. |
As my iron pile grows, my cash pile dwindles.
I'd really like to reverse that trend. LOL Make me some bonafide, non-cutthroat offers. Mark. |
I can palletize anything you want and take it to a terminal for FREE.
However, I'm NOT interested in selling to a buyer, then transporting to the buyer for FREE. "Ass, Gas or Grass, noon rides for FREE" :cool: Mark. |
Picked up 2 6.7 cranks that are freshly ground .010-.010.
Both need gears pressed back on, $650 each. Mark. |
Okay, this is the final price list, as I will be breaking them down and piecing them out as follows:
6 6.7 bare blocks, all need bored and surfaced, all are currently standard, $850 EACH. 4 6.7 cranks, all standard, bet on them needing ground, $750 each. 2 6.7 cranks, fresh ground .010-.010, one needs re-polished, it got a few water drops on it, $650 each. 4 6.7 Cylinder heads, all are not cracked on the shelfs, 2 were from very MILD burns, $400 each. Discounts for volume buys! However, it is full price if you wanna' be a PITA. :D On small orders of 1 or 2, I will palletize and take to a TERMINAL for the buyer. THE BUYER will be responsible for arranging shipping and providing a BOL. MAY sell all of this as a lot, PLAN ON PICKING THEM UP IF YOU GO THIS ROUTE. I HAVE NOTHING THAT I FEEL SHOULD BE RE-ASSEMBLED AND RUN AT STANDARD SIZES! IF YOU GET A BLOCK AND/OR CRANK AND IT POLISHES OR HONES TO STANDARD SIZE AND IT HAS PROPER CLEARANCES, THEN LUCKY YOU! I WILL NOT STAND BEHIND STANDARD PARTS!!! |
Still have the Complete 6.7 rail and lines, with RPS and do you have pictures you can send me?
|
I have the rail and lines.
Can't do pics, phone usually won't send them unless I try to send, turn it off, then turn it back on. That gets old. Mark. |
Pm sent.
|
I'm making this very simple.
$13,000 gets everything I have that is 6.7 here. This will include oil pans, timing cases, valve covers, rails, lines, dampers, the whole mess. This is essentially 4 assembled complete long blocks, then 3 basic, disassembled short blocks and a couple of bare blocks. 2 of the long blocks are mild burns, with no cracks in the heads. There will be no turbos, pumps or injectors. Everything is standard except 2 cranks, which are fresh .010-.010. Bring your truck, trailer and cash and plan on an all day job loading. |
Make me some offers, but don't be insulting.
NO, $1000 won't get a longblock! Remember, nothing being sold is ready to run standard, I feel it all needs machined. Mark. |
Reminder price list:
6 6.7 bare blocks, all need bored and surfaced, all are currently standard, $850 EACH. 4 6.7 cranks, all standard, bet on them needing ground, $750 each. 2 6.7 cranks, fresh ground .010-.010, one needs re-polished, it got a few water drops on it, $650 each. 4 6.7 Cylinder heads, all are not cracked on the shelfs, 2 were from very MILD burns, $400 each. I also have rails, lines and other miscellaneous parts. I am heading to Pittsburg, PA, by way of Indiana, Michigan and Ohio, early next week and can drag some of this along, IF IT IS PRE-PAID!!! |
How many cp3 do you have mark?
|
Maybe 1 or 2 cores for 6.7s.
Mark. |
Shoot me a pm with your prices on them.
|
All times are GMT -5. The time now is 12:45 PM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com