cgriffin224
New member
I've got some interest in going from a FMVB in my 47RH to an anteater, All that's needed would be to switch Valve bodies through you guys, correct? Aside from a lockup switch? Does it control OD?
I appreciate it. Any idea what the measurement is on the RE Case, as opposed to the RH? Whats the price on a RE Valvebody through you guys?
You'd need to swap to a RE case. Or, machine the electronics hole larger on the RH front case half and use a RE OD housing that supports the two-wire speed sensor. Then swap to a RE VB with late (2000+) electronics.
Yes, it controls all gears including OD as well as TCC lock up.
I have a stand alone controller in my Firepunk transmission, does the Anteater do the same thing? I'm looking at getting another 2nd gen for towing and this would save quite a bit on another stage 2 build.
Does it only work with the late style 47re and 48re's, or does it work on 12V and early 24V 47re's as well?
I know you can swap the harness, but I was just curious about the plug and play aspect.