Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   Shop Talk - Tool and Shop Discussion! (http://www.competitiondiesel.com/forums/forumdisplay.php?f=280)
-   -   Vernier height gauges. (http://www.competitiondiesel.com/forums/showthread.php?t=197542)

RonA 08-26-2017 08:36 PM

Vernier height gauges.
 
Picked up several old school ones in the wooden boxes today. Starrett, and Brown & Sharpe. Couple of 24" and a 36".

CorneliusRox 08-27-2017 02:56 AM

Pictures?

Pudge 08-27-2017 02:56 AM

Nice! Seems like the days of actually using them are all but gone. They were the first layout tools I learned to use, don't even know where one is at now.

Sent from my SM-G930R4 using Tapatalk

Blueboy 08-27-2017 11:18 AM

Most shops have switched over to digital.
I would like to see someone just learning, to read a old vernier caliper.

RonA 08-27-2017 12:55 PM

2 Attachment(s)
2 Starrett, 2 Brown & Sharp. Starrett inside mic set as well. A little rust on the i.d. set, but should clean up nicely.

CorneliusRox 08-27-2017 04:16 PM

haha those are sweet!

Red Sleeper 08-27-2017 05:07 PM

That's pretty cool Ron. Nice find. What are you measuring with tools that large?

I learned how to measure and do layouts with vernier tools. It makes everything else come easier once you understand how to use one of these.

RonA 10-10-2017 06:09 PM

I used one of the ID sets today. A bit of oil and some steel wool on the rust and they worked like a charm.


All times are GMT -5. The time now is 05:14 AM.

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2018, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com