Tire sizing for reverse leveled w/ 20" wheels
Planning on taking my 2" leveling kit off the front and dropping the rear 2". Looking for recommendations and/or pictures of different tire sizes. Going to run 20x9 wheels.
|
33/12.5/20's with -44 rub up front stock height. even with stops welded on. a 305 somethings on a 20x9 should work well.
|
Quote:
|
my cousin run a 295 something 20 on his third gen. it took him a long time to find that size but they don't rub at all on 20x9's. also a mud tire makes the rubbing game worse. were like a 420 has a rounded sidewall.
|
On my pos 24v I have 20x9s with 305/55/20. They rub the inner fenders ever so slightly when turning. Stock worn out coils in the front.
|
Quote:
And these for tires : $219.98 - Cooper Zeon LTZ - tires | Buy Cooper Zeon LTZ tires at SimpleTire |
295 or 305s ive had in the past did not rub
|
All depends on back spacing of wheel. 20x9 with 5.5 to 5.75 bs will not rub bumper or fender liner with a 13.5 tire even. Will slightly rub on control arm at full lock.
|
Quote:
|
305/50 or 305/55
|
buy new wheels~
|
make sure you select 8 lug when ordering....
|
Quote:
|
20x10s and high offset (somewhere around 45mm rub stock with 305/55s. I’ve got the rear down 3”, gonna go to 305/50 when I drop the front 2”
|
All times are GMT -5. The time now is 11:28 PM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com