The Rebirth of a 93 W250 , Building a dream.
Hello Folks.
So as many of you know these truck builds just seem to get, "out of hand" sometimes and you end up a totally different direction than you ever thought would be possible, Well that's where this begins. Started out as a 2 owner truck that had had a pretty modest life 100% stock 160hp of fury pulling around a horse trailer. Well I got my hands on it in 2013 at 270,000 miles busted the tamper proof caps off of the injection pump and went to town. http://i1073.photobucket.com/albums/...ps0kg8sdm2.png http://i1073.photobucket.com/user/Tr...psmsdpqlmd.jpg We went through a couple of different turbocharger's, a couple different sets of injectors, some really fun times tinkering with the truck and tuning it, really getting a feel for things and it eventually ended up with a set s363 s475 compounds, and some ridiculous big (for a VE pump) injectors. Got that setup all dialed in and that wasn't enough for me. Some local buisnessmen got together and are converting the airport closest to me into a drag strip! Then I found out the engine had a scored piston. Tore it down and proceeded to change my mind SEVERAL times on the direction of the build. But with the onset of the new 5.90 index and my entry into diesel power challenge 2018, I have finally made my mind up. # 5 Piston The engine build, IH Cast 12v block D&J FSR Pistons Carillo HD Connecting rods 6.7 Crankshaft Scheid billet body triple feed 5x25s 13mm P7100 with Columbus Diesel's pump cam 700GPH DSR lift pump Hamilton street head with oversized valves worked over by D&J Fire Ring groove in block and head 625 Headstuds 14mm main studs and girdle Mahle HX bearings coated by Calico Hamilton 207/220 cam Manton Lifters Manton Rockers (once Manton's get them finished up) Manton Pushrods Steed Speed dual wastegate T6 manifold s475 on the manifold and 2 s467.7s as atmospherics 2 stages of nitrous The Chassis After many an hour reading and chatting with guys that have put this level of horsepower through a 1st gen's cheap ass flexi frame, I have decided to go of similar direction to OLD UGLY's newest revision, and use a 3rd gen frame. Im headed down to San Antonio on Friday (1-5-18) to bring home this honey, which will then get treated to an EMF HD Steering kit, some DT PROFAB long arms, and carli ball joints for sure. Will be going through the axles and rebuilding them as well The Transmission FMVB 48RE Was sent off a couple weeks ago to Power Driven Diesel, To receive a full build and refresh. So stay tuned for some updates as work is going to begin very very shortly on this bad girl. Once I get back with the new chassis its on! |
None of the photos show up. I would switch from Photobucket unless you want to pay their ransom.
|
Are you from Onawa?
|
Quote:
|
Quote:
Technically Blencoe, but yes. |
Few pictures of the truck and it's old setup https://uploads.tapatalk-cdn.com/201...c173ac369f.jpghttps://uploads.tapatalk-cdn.com/201...231dd589eb.jpghttps://uploads.tapatalk-cdn.com/201...d466510d9c.jpg
Sent from my SM-G900V using Tapatalk |
And finally the truck that's donating the chassis to the cause https://uploads.tapatalk-cdn.com/201...62c82a0ded.jpghttps://uploads.tapatalk-cdn.com/201...129486920e.jpg
Sent from my SM-G900V using Tapatalk |
Interior has corbeau Moab seats, cheetah scs shifter, isspro ev2 gauges throughout.https://uploads.tapatalk-cdn.com/201...35459b9674.jpg
Sent from my SM-G900V using Tapatalk |
Sa-weeet!
|
Thank You! It has been a long time in the making, but its finally time to make it all come together.
|
Very nice, can't wait to see this build.
|
Gonna follow this one. Good luck!
|
Everything sounds great other than building for the 5.90 class and the long arm suspension lift. Following, good luck!
|
Curious how easy or difficult the 1st gen body will mount to 3rd gen frame.
|
Quote:
|
In for the build, parts are looking fantastic...
|
Quote:
Spoke to my Yukon gear guy about everything for the drivetrain, will get that ordered tomorrow. Have my sand blaster ready to go to town on the frame once I get it home. By the way ANYONE need any 3rd Gen cab parts? I have a real clean set of front doors, fenders, hood, bumper, and grill to get rid of I missed a call from Will at Power Driven Diesel tonight, but we exchanged a few emails about the condition and status of the transmission I purchased from "a friend of a friend" fortunately it was an honest deal and it contained what it was supposed to. With that being said we'll be chatting on the phone tomorrow about what else it will need to survive as "comfortably" as it can behind my engine. No corners will be cut. |
Made it into San Antonio about 15 minutes ago. Picking up the chassis tomorrow morning
|
Made it home with her at 4 a.m. this morning. Cab is coming off tomorrow. So it begins! !!https://uploads.tapatalk-cdn.com/201...3b8fbbf0f1.jpg
Sent from my SM-G900V using Tapatalk |
All times are GMT -5. The time now is 06:11 AM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com