Competition Diesel.Com -  Bringing The BEST Together

Competition Diesel.Com - Bringing The BEST Together (http://www.competitiondiesel.com/forums/index.php)
-   94-98 2nd Gen. 12V (http://www.competitiondiesel.com/forums/forumdisplay.php?f=87)
-   -   Which Belt? (http://www.competitiondiesel.com/forums/showthread.php?t=198183)

WAYNES WORLD 10-27-2017 08:32 PM

Which Belt?
 
Guys,

I'm eliminating my fan by going to electric fans. Does anyone know which belt I should put on ?

Thank You,
WAYNES WORLD

BigPapa 10-27-2017 10:35 PM

1 Attachment(s)
Why not just take the blade off and leave the fan hub and pulley? I don't see how you could run a belt without a fan unless you're also running an electric water pump.

I don't think routing it like this will give it enough grip to drive the water pump. Maybe I'm wrong.

http://www.competitiondiesel.com/for...1&d=1509161696

WAYNES WORLD 10-28-2017 10:07 PM

Which Belt
 
Quote:

Originally Posted by BigPapa (Post 2641686)
Why not just take the blade off and leave the fan hub and pulley? I don't see how you could run a belt without a fan unless you're also running an electric water pump.

I don't think routing it like this will give it enough grip to drive the water pump. Maybe I'm wrong.

http://www.competitiondiesel.com/for...1&d=1509161696

I run 4 electric fans. So I can lose the pulley. I have been running the pulley without the blades because of the polished pulley.
Can you tell your belt number?

WAYNES WORLD

R1raptor 10-29-2017 08:00 PM

It will drive the water pump without the fan pulley. I've ran mine for a couple years without issues. But I'm not running an ac compressor so I'm no help on belt length.

kleann 10-29-2017 08:27 PM

Belt length can be closely figured out using string. What are you using for a tach? the stock crank sensor will interfere with this belt routing.

WAYNES WORLD 10-30-2017 04:10 AM

Which Belt
 
R1raptor,

I'll see what it looks like once I put the motor back in. I'm painting it right now. Thanks

clean,

I'll give it a go with the string method but I'm stock crank sensor. Once I get the motor in, I revisit this again.
Thanks,

WAYNES WORLD


All times are GMT -5. The time now is 04:00 PM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com