Turbos, injectors, Hamilton cam

Pudge

Pudge

New member
I've realized that I borderline on hoarder status when it comes to truck parts, and since the pulling classes have settled the old stuff has to go.

JEB Garrett/Precision based 4.1" turbo. Has two passes since it came from them with no shaft play. New billet compressor wheel and 11 blade g-trim turbine. 2.6" non protrusion cover and custom bowl style air shutoff included, unless you just don't want it.
$2800

S480/87 1.0 New billet compressor wheel and cover, updated to 360 bearings. Never ran. Was a 2.6 charger that I had made normal.
$1500

Hamilton 200/220 .340-.360 12V cast cam. Looks new, used for a season pulling, went to custom billet cam.
$400

North East Diesel, dual feed, stock Bosch body injector. 12V, 5x22, spray angle set by Kevin. Ran last season on them after having them checked and reset, ran fine, changing classes. Looks like a used injector, can send them back to Kevin to have checked.
$1200

All prices are shipped in the US.
eb5c2c2806a8b83ff17f2a71a85839e8.jpg
67779f8637fdd2f1efd1113e9669354c.jpg
c13f7221f11a1089704d94f2c6ca3af8.jpg
3e40a902242fe821f081b03a223d701d.jpg
b4986b5ea228b6ba2931e8a1828b6688.jpg
6a6d4c61b72ff11303aa1aa6fd1a3c5b.jpg


Sent from my SM-G930R4 using Tapatalk
 
Weekend bump. Make offers, the worst I'll do is tell you no

Sent from my SM-G930R4 using Tapatalk
 
I am intrigued by the shutoff design on the 4.1. I honestly have no intent on buying, but am curious. Do you have more pictures of the shutoff?
 
I don't by itself. The charger had a flat rim machined around the forward edge to hold the 2.6 ring, I'm guessing that's what it was for anyway. So I thought that a large radius leading in would work better, machined that to mount on the flat and made a custom "rain cap" style aluminum shutoff flap.

Sent from my SM-G930R4 using Tapatalk
 
$2200 on the 4.1 turbo
$350 for the Hamilton cam
Somebody needs this stuff more than I do

Sent from my SM-G930R4 using Tapatalk
 
Does that cam work in a stock 12 valve? Obviously not like bone stock fuel and air but pistons and internals
 
It WILL need fly cuts in your pistons, .120" cleared in mine but each setup is different.

Sent from my SM-G930R4 using Tapatalk
 
Injectors are sold, the rest is still for sale.

4.1 turbo $2100
Billet s480/87 $1200
 
Last edited:
Also have a 3.0sb JEB HX60, brand new in the box, latest updates with new 3.6 turbine, 25cm housing. Included is D&J billet shutoff with velocity stack
$4000 shipped. Changed classes before I could use it

Sent from my SM-G930R4 using Tapatalk
 
Make offers guys, I dont want to resort to fb to sell parts unless I have to

Sent from my SM-G930R4 using Tapatalk
 
THU10PF are the only identifying marks I can find on the housing. So I'm guessing a 1.0? It's a single scroll T6

Sent from my SM-G930R4 using Tapatalk
 
You must log in or register to reply here.
Back
Top