48 swap from g56

F

farmtruck09

New member
I’m sure there’s a million threads on this, bought a suncoast mega 48. (Stage 3). Comes with crossmember, Firepunk anteater, auto valvebody, adapter plate. I’m pulling g56. What all will I need to finish this? List is this :

Trans cooler
Auto shift Column w harness (factory) or can I have auto valve body w bm floor shifter incase I swap to manual vb later?
Shorten t case shaft
Drive shafts lengthen or short? One piece rear in 2012 4 door long bed?

Thanks
 
Suncoast sold you a Firepunk anteater?

Did the same swap except I’m a 3rd gen.

Don’t try to source everything you need for a column shift that would be a hassle. Find a shifter that works for a torqueflite 727 and your gtg.

Which valvebody do you have exactly...because if it’s not PCS or mvb it won’t work.

Other than that your list looks mostly complete, I would also recommend a 6.7 fluid cooler if you don’t already have plans for one. A few compression fittings and your good!

Good luck man!
 
Poulina said:
Suncoast sold you a Firepunk anteater?

Did the same swap except I’m a 3rd gen.

Don’t try to source everything you need for a column shift that would be a hassle. Find a shifter that works for a torqueflite 727 and your gtg.

Which valvebody do you have exactly...because if it’s not PCS or mvb it won’t work.

Other than that your list looks mostly complete, I would also recommend a 6.7 fluid cooler if you don’t already have plans for one. A few compression fittings and your good!

Good luck man!
Click to expand...

Trans coming from private party is why the ant eater from fire punk. the ant eater controls the auto valve body, no PCs or man vb. It has 3 settings and can be tuned to many diff options etc also od off etc, still learning 48 swap game its gone crazy,
 
You must log in or register to reply here.
Back
Top