Not a whole lot of builds with a bunch of pictures, so I'm going to share my experience with it. I bought a 1997 ram 1500 318 4x4 for 500$ and I'm using my 1995 ram 2500 12 valve cummins 2wd as the donor for the cab, trans, motor.
I got a badly toasted 47rh 4x4 with the np241dld tcase for 500$ to convert my built 47rh transmission to 4wd.
My transmission consists of TCS servos, 4.2 lever, TCS 300m input, DPC Quad disc converter, billet apply piston, and so forth. I am running a stock output for now.
Motor has stock 160 pump set for full rack travel at 50psi with PDD single turbo afc spring. 4k's, no plate, rack plug, 7mm delivery valves, racked barrels, about 26* timing.
5x18 155 cone angle injectors from infinite performance, Borg warner s369sxe .91 housing on a ATS t4 manifold, ARP headstuds. Motor has 171,xxx on it.
The 97 1500
Front flip, cab, bed, motor gone.
Donor 95 cummins
I'm going to start pulling everything from the cummins today and will upload pictures as the progress continues.
Sent from my iPhone using Tapatalk