Been playing with spray foam and cleaning out mud from places I wasn't able to get too when the truck was together. The front cross member was packed full, got several pounds of mud out of it as best I could, couldn't get it all. Been spraying a can and letting it set and then trimming it off and seeing where I need to add more. Really trying to just fill in areas that are a pain to wash out and where it piles up during a run and weights the truck down for the next pass.
Trans mount is in the truck and have the driveshaft changes figured out. Rear driveshaft will be 24" long and the front will be 56.5" long. Ready to pull all that out of the truck now and start getting areas where the por15 didn't stick good sanded and cleaned along with coating the foam. The por15 really hardens and seals that foam.
__________________
2005 Dodge Ram 3500 2x4 QC
1999 Dodge Ram 2500 4x4 QC
Coaltrain - 1946 Dodge Power Wagon powered by a little modified 12 valve.
Thanks to my sponsors: CP-Carrillo, Air Dog, Muldoons Diesel Performance, Power Driven Diesel, Diesel Performance Converters
|