View Single Post
Old 04-11-2012, 09:35 AM   #6
oliverpuller
 
oliverpuller's Avatar

Name: oliverpuller
Title: IH Puller Now
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 47
The 706 is a little different than the 766. You would need the ag front and rear cover from any 400 series tractor to bolt the engine in (the covers work for both the 400 and 300 series). The front cover mounting tabs will need to be ground down to fit in the 706 frame rails and you will only be able to use one of the bolt holes (1066 or such frame rails would work without any modifications but then you would have to deal with the front end and sheet metal). As far as the clutch goes it will be different also, and I believe that there is a setup using a 966 hydro flywheel to make it work but dont hold me to that.
__________________
Farmall 560 w/ DT466 6000 lbs 30.5 tires In the Works
  Reply With Quote