I have decided to try a different turbo setup. looking to get rid of my turbos I currently have..
HE351 with billet wheel
1" wastegate
machined exhaust housing to fit 76x64 10 blade turbine
zero run time since rebuilt. turbo is currently at shop getting balanced
475 75/96/1.32
idle time only like new
* source auto primary mount for 24V
*homemade mount for 12v with trans cooler on side of block, uses the holes in the adapter plate
*homemade hot pipe
* keating machine flanged for he351 and t6 with schedule 40 elbows to make own hot pip
*several 90* and 45* keating machine tight radius elbows to make interstage and other piping (3.5" radius)
*oil feed lines for both turbos
*homemade spring gate for 351
*brand new S&B filter for primary
*oil fitting for 24V block for primary return
*5" source auto downpipe
*2nd gen hot pipe from turbo to intercooler
*spacers for secondary to manifold also
may be other things I have that I cant think of. if interested just ask. I was planning on putting this in my 2006 f250 with my 12v build so piping hasn't been built. figured id hold off as long as possible to build because it probably wouldn't fit majority of builds out there. if anyone has any questions please feel free to ask.
asking 1800 for everything I have. if theres anything I forgot itll be included as well.. if I get a serious buyer we will talk about shipping costs and come to an agreement. MAKE OFFERS don't really know what to ask. I know I have quite a bit tied into it but need to sell to help with new setup.
thanks
Richard
928-241-1074
HE351 with billet wheel
1" wastegate
machined exhaust housing to fit 76x64 10 blade turbine
zero run time since rebuilt. turbo is currently at shop getting balanced
475 75/96/1.32
idle time only like new
* source auto primary mount for 24V
*homemade mount for 12v with trans cooler on side of block, uses the holes in the adapter plate
*homemade hot pipe
* keating machine flanged for he351 and t6 with schedule 40 elbows to make own hot pip
*several 90* and 45* keating machine tight radius elbows to make interstage and other piping (3.5" radius)
*oil feed lines for both turbos
*homemade spring gate for 351
*brand new S&B filter for primary
*oil fitting for 24V block for primary return
*5" source auto downpipe
*2nd gen hot pipe from turbo to intercooler
*spacers for secondary to manifold also
may be other things I have that I cant think of. if interested just ask. I was planning on putting this in my 2006 f250 with my 12v build so piping hasn't been built. figured id hold off as long as possible to build because it probably wouldn't fit majority of builds out there. if anyone has any questions please feel free to ask.
asking 1800 for everything I have. if theres anything I forgot itll be included as well.. if I get a serious buyer we will talk about shipping costs and come to an agreement. MAKE OFFERS don't really know what to ask. I know I have quite a bit tied into it but need to sell to help with new setup.
thanks
Richard
928-241-1074
Last edited:
