Quote:
Originally Posted by PhillipF
I am currently running 6.7 injectors in a 5.9 head, the top of the Injector bore and also the area were the hold down bolts need to be machined down about .100-.120 for a completely unmodified 6.7 injector and holder to fit correctly in a 5.9 head.
If you only machine the bore then you have to modify the hold down. If you don't machine the bore the injector will not seat to the bottom of the bore and you will have a bunch of compression in your return line.
|
How does it act?
Sent from my XT1575 using Tapatalk
__________________
Check out @bdmaximusworx
05.5 Campanella White TDi Jetta 5spd 45.5MPG
-Little Sexy
'10 Silver F250 CCLB 4X4 6.4L cummins Swapped
Insta @trash.panda250
|