I currently run an A1000 pump and with my other injection pump pressures were dropping to 30PSI at
WOT. Now with my other pump I am seeing 20PSI at
WOT..
A1000 specs are:
Flows 600 lbs. per hour @13.5 volts and 45 psi.
Flows 800 lbs. per hour @13.5 volts and 8 psi.
Aeromotive eliminator pump specs are:
Pump flow exceeds 800 lbs. per hour @ 13.5 Volts and 45 PSI.
Pump flow exceeds 1,000 lbs. per hour @ 13.5 Volts and 8 PSI.
Size and shape look pretty similar, so I was thinking of swapping the Eliminator pump in.
Any opinions?