Quote:
Originally Posted by Spurrinit
I put new oem motor mounts on along with the energy suspension outer pieces. Original mount inserts were torn.
It’s good to know that the cam should idle smooth. Thanks for the reply.
I’m going to look into a new dampener and see if that helps any.
I set valve lash to .01 intake .02 exhaust.
I used a new valair hd single disk with their flywheel.
|
It’s possible you are unfamiliar with the new clutch vibration, I would contact them and see if that is normal before you tear your hair out
__________________
05 QCSB24v HTD 6.8L, DDP fueling PDD shifted
2011 MCSB 6.7, built 68rfe
|