47/48 Direct Drum Modifications (Share)

Jeffrey Weeks

Jeffrey Weeks

New member
What modifications have you done to your direct drum? looking for some ideas or tips. also any other mods to increase extra lubrication throughout the transmission.
 
Hmmm there’s a billet piston you can install. You can put all 15 springs in it.


Sent from my iPhone using Tapatalk
 
Info like this is kept tight lipped. You'll find bits and peices if you search long enough but that's about it.
 
Run a thinner reaction plate and get 5 frictions in there. I think the thread your looking for is on cf
 
You can drill another hole in the drum. I copied him on a build I did 2015 some pics are mine and some might be screen shots of his write up
 

Attachments

  • C81A27DB-2865-47E8-B5BE-DDE6BE83355B.png
    C81A27DB-2865-47E8-B5BE-DDE6BE83355B.png
    1,019.1 KB · Views: 0
Last edited:
Couple more
 

Attachments

  • 40C8418A-5387-4055-945D-9DF686D2B179.png
    40C8418A-5387-4055-945D-9DF686D2B179.png
    1.2 MB · Views: 0
  • CBD5ED28-6B52-4D41-8C76-301FB5B7518A.png
    CBD5ED28-6B52-4D41-8C76-301FB5B7518A.png
    1 MB · Views: 0
I don’t recommend using a typical size drill though. I had to keep pressure on the bit and flex it while drilling and I’m lucky I didnt snap the bit off.
 
Last edited:
You must log in or register to reply here.
Back
Top