View Single Post
Old 06-20-2010, 07:44 PM   #10
NickTF
 
NickTF's Avatar

Name: NickTF
Title: Single turbo turd.
Status: Not Here
Join Date: Jun 2007
Location: Laurel, DE
Member`s Gallery
Posts: 5,887
Like they said a swivel socket is your friend to get those 15mm head bolts (4) holding the pump to the studs on the timing case. To put the nuts back on (if you remove them) that are hard to get put the nut in the 15mm socket and wrap it with one revolution of electric tape around the socket and nut and lap the tape over the nut a bit. It will keep the nut in the socket and let you start it on the stud and still allow you to pull the socket off releasing the nut when it's threaded.
__________________
97 12v sold. 2015 Power Wagon DD!
  Reply With Quote