Quote:
Originally Posted by Bersaglieri
What are the actually specs on that CAT S300g? I think the one I once had
I have stock head bolts on my Holset compound setup...I was expecting head gasket issues, but none ever came. The compound piping was from Poole. Source has been around a long time, not sure about the others.
|
I measured it and its a 60/65/14
I ended up going with the Evil Fab kit because they are the only one that builds there kit to use the stock wastegate actuator on the 351cw. I got the turbo tuner from PDD so should be very helpful in tuning them. I might weld a vband elbow on the 300g sometime and put it in place of the 351 to see how it does.
__________________
98 3500 QC 4X4 Flatbed HE351CW over Bullseye S475/87/1.25, L19 studs, PDD 5x14's, 4gsk, 025 DV's,ATS mani, build still in process
Last edited by jstaylor954; 01-17-2019 at 07:36 AM.
Reason: Spelling
|